LEVITON 30-AMP 50-AMP 125-V ANGLE ELE/PLUG LEV 930
LevitonĀ® offers a large selection of 15, 20, 30 and 50 A commercial-grade Straight Blade Plugs and connectors, available in a wide variety of features. These rugged performers are moisture, chemical and abuse-resistant and they're ideal for indoor and outdoor use. Our EPTR rubber backed plugs and connectors stand up to rough use, protecting against dirt and moisture. The deep slotted, backed out terminal screws draw backwire clamps securely over stripped leads for maximum conductivity.
-
BrandLevitonĀ®
-
UPC078477644942
-
Manufacturer Part Number930-E
-
CountryUSA
-
Temperature Rating-40 to 60 deg C
-
Terminal TypeBacked-Out Screw
-
MaterialThermoplastic
-
ColorBlack
-
TypeAngle Grounding
-
GradeCommercial
-
NEMA RatingNEMA 5-30P/5-50P
-
Voltage Rating125 V AC
-
Cord Diameter0.63 to 1.05 in
-
Amperage Rating30/50 A
-
Series930
-
Number of Poles2
-
Dimensions2.56 in W x 3.49 in H
-
Number of Wires3
-
Alternative Part Number15895618
-
UNSPSC39121402
-
IDEA Index ID15895618
-
Package DescriptionEACH
-
Standards/ApprovalsANSI C-73|CSA C22.2 File No. 42/LR-406|NEMA WD-6|NOM 057|UL 498|UL File No. E13393
-
Warranty2 years Limited
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
LevitonĀ® offers a large selection of 15, 20, 30 and 50 A commercial-grade Straight Blade Plugs and connectors, available in a wide variety of features. These rugged performers are moisture, chemical and abuse-resistant and they're ideal for indoor and outdoor use. Our EPTR rubber backed plugs and connectors stand up to rough use, protecting against dirt and moisture. The deep slotted, backed out terminal screws draw backwire clamps securely over stripped leads for maximum conductivity.
McGillĀ® CAGEROLĀ® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROLĀ® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGillĀ® CAGEROLĀ® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROLĀ® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
BrowningĀ® 1080621 Type S2 Split-Taper Bushing, 3-15/16 in Dia Bore, 4.27 in Dia Small End/4-5/8 in Dia Large End Dia Barrel, 6-3/8 in Dia Flange, 6-3/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
2-TON L-90 10'-LIFT CHAIN HOIST
GatorĀ® GatorGrit 3314 Coated Sanding Sheet, 11 in L x 9 in W, 320 Grit, Garnet Abrasive, Paper Backing
GatorĀ® GatorGrit 3314 Coated Sanding Sheet, 11 in L x 9 in W, 320 Grit, Garnet Abrasive, Paper Backing
