HCI Preferred Supplier 46937 Economy Miniature Ball Valve, 1/2 in Nominal, FIP End Style, Brass Body, FKM O-Ring/Stem/Seal Softgoods
HCI Preferred Supplier 46937 Economy Miniature Ball Valve, 1/2 in Nominal, FIP End Style, Brass Body, FKM O-Ring/Stem/Seal Softgoods
-
BrandGeneric
-
Manufacturer Part Number46937
-
CountryUSA
-
Temperature Rating356 deg F at 142 psi/212 deg F at 355 psi
-
Pressure Rating450 psi
-
MediaAir, Oil and Water
-
Trim MaterialHighly Inert PTFE Seat
-
TypeEconomy
-
Nominal Size1/2 in
-
Ball MaterialNickel Plated Brass
-
Softgoods MaterialFKM O-Ring/Stem/Seal
-
Domestic/ImportImport
-
Body MaterialBrass
-
End StyleFIP
- Blow-out proof stem for safety
- 1/4 turn instantaneous on-off operation
- Quarter-turn handle design
- Non-adjusting FKM o-ring stem seal design never needs tightening
- Good for propane, Gas and diesel
- Not good for steam
-
UNSPSC40141607
-
Package Description20/BX
-
Catalog
Recently Viewed
HCI Preferred Supplier 46937 Economy Miniature Ball Valve, 1/2 in Nominal, FIP End Style, Brass Body, FKM O-Ring/Stem/Seal Softgoods
HCI Preferred Supplier 46937 Economy Miniature Ball Valve, 1/2 in Nominal, FIP End Style, Brass Body, FKM O-Ring/Stem/Seal Softgoods
Remke Tuff-Sealâ„¢ 7303-010R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.4 to 0.54 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Koyo 30204JR Metric Series Caged Tapered Roller Bearing, 20 mm Dia Bore, 47 mm OD, 1 Row, 15.25 mm W, 27 kN Dynamic/27.2 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
ALAN 12-THHN ORANGE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
ALE12THHNORG >
HCI Preferred Supplier 940179 Ball Valve, 2-1/2 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940179 Ball Valve, 2-1/2 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
Remke Tuff-Sealâ„¢ 7303-012R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.7 to 0.97 in Cable, For Use With 1 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
