Banjo® V150SL 3-Way Valve, 1-1/2 in Nominal
Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.
FKM seals.
Maximum operating pressure :225 psi
Precision molded in polypropylene. Polypro:py:lene is reinforced with fiber:glass for additional strength.
PTFE self-lubricating stem bushings and seats.
Self-aligning ball moves freely against the PTFE seats for smooth operation.
Stainless steel bolts.
-
BrandBanjo®
-
Manufacturer Part NumberV150SL
-
CountryUSA
-
Type3-Way
-
Nominal Size1-1/2 in
Recently Viewed
Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.
FKM seals.
Maximum operating pressure :225 psi
Precision molded in polypropylene. Polypro:py:lene is reinforced with fiber:glass for additional strength.
PTFE self-lubricating stem bushings and seats.
Self-aligning ball moves freely against the PTFE seats for smooth operation.
Stainless steel bolts.
500-A-1X1-7/16 EMERSON POWER TRANSMISSION
1-7/16"-ID TORQUE LIMITER - MRE500A1X17/16>
National Hardware® N146-159 V518 Non-Removable Pin Hinge With Aluminum Wire, 10 lb, Wall Mount, Zinc Plated
DRILLCO 21PS080B 2100PS Super High Performance Spiral Point Tap, Right Hand Cutting, M8x1 Thread, D5 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral point tap improves thread quality, and aids in chip evacuation.
Browning® 1171453 Single Strand Split Taper Bushed Type 4 Roller Chain Sprocket, 3/4 in Dia Bore, 11.893 in OD, #60 Chain, 48 Teeth, Steel
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
Browning® 1077452 QD Bushing, 2-9/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 1.995 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
