NIBCO 72-104-01 2-Piece Ball Valve, 3/4 in Nominal, FNPT End Style, Full Port, Domestic
Apolloâ„¢ 72-104-01 72-100 2-Piece Ball Valve, 3/4 in Nominal, FNPT End Style, Full Port, Domestic
-
BrandApolloâ„¢
-
UPC670750680854
-
Manufacturer Part Number72-104-01
-
CountryUSA
-
Port TypeFull
-
Pressure Rating3000 psig CWP
-
Top to Inlet Center2.62 in
-
Trim MaterialChrome Plated Carbon Steel Stem/RPTFE Seat
-
Type2-Piece
-
Actuator TypeLever Operated
-
Nominal Size3/4 in
-
Series72-100
-
Ball MaterialChrome Plated Carbon Steel
-
Inlet to Outlet Length3.8 in
-
Domestic/ImportDomestic
-
Body MaterialCarbon Steel
-
End StyleFNPT
- 01 - Standard configuration
- Barstock design
- Reinforced seats
- Zinc phosphate corrosion protection
- Blow-out proof stem
- Heavy duty lever
- 150 psig saturated steam
- Vacuum service to 29 in Hg
- Cold non-shock
-
UNSPSC40141607
-
Package Description4/BX
-
Standards/ApprovalsASTM A08 Body|ASTM A08 Ball/Stem|MSS SP-110
-
Warranty5 years
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
NIBCO 72-104-01 2-Piece Ball Valve, 3/4 in Nominal, FNPT End Style, Full Port, Domestic
Apolloâ„¢ 72-104-01 72-100 2-Piece Ball Valve, 3/4 in Nominal, FNPT End Style, Full Port, Domestic
Koyo 30203JR Metric Series Caged Tapered Roller Bearing, 17 mm Dia Bore, 40 mm OD, 1 Row, 13.25 mm W, 20.8 kN Dynamic/20.7 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
6.75" LONG THIN NEEDLE NOSE PLIER
Use Elmer's non-toxic Carpenter's Interior Wood Glue for projects requiring fast setting and strong bonding. The strong adhesive clamps in just 20 to 30 minutes, and takes 24 hours to fully bond. For interior use only, the wood glue is sandable, paintable, and cleans up with water, making every indoor project easier. With a one-gallon adhesive bottle, you'll be set for every project.
Remke Tuff-Sealâ„¢ 7303-014R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 1.2 to 1.5 in Cable, For Use With 1-1/2 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
12-OZ AEROSOL #2 LIQUID WRENCH-RADL212>

