NIBCO 75-105-01 2-Piece Ball Valve, 1 in Nominal, FNPT End Style, Bronze Body, Standard Port, Domestic
This Apollo™ ball valve meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked in the open or closed position with the same hardware.
-
BrandApollo™
-
UPC670750691416
-
Manufacturer Part Number7510501
-
CountryUSA
-
Temperature Rating50 to 200 deg F
-
Port TypeStandard
-
Pressure Rating600 psi CWP
-
Top to Inlet Center2-1/4 in
-
MediaGas/Water
-
Trim MaterialBrass Stem/RPTFE Seat
-
Type2-Piece
-
Actuator TypeLever Operated
-
Nominal Size1 in
-
Series75-100
-
Ball MaterialChrome Plated Brass
-
Inlet to Outlet Length3.37 in
-
Domestic/ImportDomestic
-
Body MaterialBronze
-
Orifice Size0.87 in
-
End StyleFNPT
- Reinforced seats
- Blow-out proof stem
- May be padlocked in open or closed position with no change of hardware
- 150 psig saturated steam
- Vacuum service to 29 in Hg
- Cold non-shock
- Hardened ball for wear resistance
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 6FXZ2 |
| Ferguson | A7510501 |
-
UNSPSC40141607
-
Package Description10/BX
-
Standards/ApprovalsASTM B584-C84400 Body|ASTM B16 Ball/Stem|CRN OC10908.5C|MSS SP-110|NACE MR0175/MR0103|NSF/ANSI 61|NSF 372|PROP65: Cancer and Reproductive Harm
-
Warranty5 Years
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
NIBCO 75-105-01 2-Piece Ball Valve, 1 in Nominal, FNPT End Style, Bronze Body, Standard Port, Domestic
This Apollo™ ball valve meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked in the open or closed position with the same hardware.
3/4" CPVC TRU-UNION BALL VALVE-NIBU51TBE3/4 >
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Remke Tuff-Seal™ 2201-013R Single Eye Single Weave Closed Mesh Standard Duty Wire Mesh Cable Grip, 530 lb Breaking Strength, 0.5 to 0.62 in Cable, Bronze, TiN Coated
Tuff-Seal™ Support Grips are designed to hold the weight of cable that is vertical or sloping. Support grips serve an important function; electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in power failure. Tuff-Seal™ Support Grips are woven with non-magnetic, tinned bronze wire that absorbs strain and flexing while resisting cable pull-out, flexing and vibration. These grips are available in a variety of eye styles and cable ranges, can be used either indoors or outdoors and will support cable, metal rods and tubing with loads up to 600 lb.
Endurance blades offer faster cutting and extra long life for contractors. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
MORSE® 44586 4582 Center Cutting Double End Regular Length End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
