Temperature & Pressure Relief Valves
WATTS® 0002220 1L Series Self-Closing Temperature and Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 125 psi Pressure, 210 deg F, Bronze Body
This 1/2 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. It features a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, 2 inch short thermostat with special thermo-bonded coating and test lever. It is CSA listed. Temperature relief at 210 degrees F (99 degree C), pressure relief range is 75 to 150 psi. The standard pressure settings is 125 psi.
WATTS® 0066107 100XL Self-Closing Temperature and Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 150 psi Pressure, 180 deg F, 3 in L Probe, Brass Body
This 3/4 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features a brass body with NPT male inlet and NPT female outlet connections, 8 inch extension thermostat with special thermo-bonded coating, and a test lever. It is ASME rated and CSA listed. The temperature relief is at 180 degrees F, and the pressure relief is 150 psi (10.6 bar).
Recently Viewed
1-1/4" USS Stover Locknuts
Greenlee® 93-172 Digital Light Meter, 0.01 to 5000 FC, 0.1 to 50000 lux Measuring, +/-4% Incandescent Light Source, +/-7% Other Light Source Accuracy, LCD Display
RIDGID® 93172 Shackle With Pin, For Use With MLT3401 Tapping Tool
5-STEP ROLLING WAREHOUSE LADDERS-AGF1575G24>
2" -ID JAW COUPLING HALVES-BRWL225X2 >
Knipex® 95 11 200 SBA Burnished Cable Shear With Twin Cutting Edge, 200 mm OAL
Knipex® 95 11 200 SBA Burnished Cable Shear With Twin Cutting Edge, 200 mm OAL
The DEWALT DW5349 scaling chisel bit will get rid of concrete splatters and other materials. Built for use with slotted drive shaft hammers and is ideal for chipping or chiseling tough materials. It’s constructed out of hardened steel for longer life and increased job endurance. It measures to 8-in with 1-1/2-in chisel tip.
