WATTS® 0123496 Swing Check Valve, 1 in Nominal, Threaded x Solder End Style, Low Lead Compliance: Yes, Metal, Brass Body, Import
This 1 inch lead free swing check valve is used to prevent reverse flow in water and steam applications. It features a lead free brass body with NPT threaded end connections, lead free brass bonnet, PTFE gasket, lead free brass pin, screw and seat. This valve has metal-to-metal seating and provides low pressure drop and automatic closure when fluid flow is stopped. The working set pressure rating is 125 psi (8.6 bar) and maximum pressure is 200 psi (13.8 bar) WOG non-shock.
-
BrandWATTS®
-
UPC098268697070
-
Manufacturer Part Number0123496
-
CountryUSA|Canada
-
Low Lead ComplianceYes
-
Pressure Rating200 psi
-
Top to Inlet Center1-23/32 in
-
Trim MaterialBrass
-
Nominal Size1 in
-
SeriesLFWCV
-
Inlet to Outlet Length2-5/8 in
-
Softgoods MaterialMetal
-
Domestic/ImportImport
-
Body MaterialBrass
-
End StyleThreaded x Solder
- Lead free body construction
- NPT threaded end connections
- Maximum pressure is 200 psi
- Maximum pressure is 200 psi
-
Alternative Part NumberLFWCV 1
-
UNSPSC40141634
-
Package DescriptionEACH
-
Standards/ApprovalsASSE Listed|FM Approved|NSF Approved|UL Listed|ULC Listed|USC Certified|PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Warranty1 year Limited
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
WATTS® 0123496 Swing Check Valve, 1 in Nominal, Threaded x Solder End Style, Low Lead Compliance: Yes, Metal, Brass Body, Import
This 1 inch lead free swing check valve is used to prevent reverse flow in water and steam applications. It features a lead free brass body with NPT threaded end connections, lead free brass bonnet, PTFE gasket, lead free brass pin, screw and seat. This valve has metal-to-metal seating and provides low pressure drop and automatic closure when fluid flow is stopped. The working set pressure rating is 125 psi (8.6 bar) and maximum pressure is 200 psi (13.8 bar) WOG non-shock.
OIL SEALS-4.250" X 5.126" X .250"-CHI42380>
12-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-12-F-3/4
12 TOOTH SPROCKETS FOR #40 CHAIN
Weiler® 13015 Single Row Cup Brush, 2-3/4 in Dia Brush, M10 x 1.25 Arbor Hole, 0.014 in Dia Filament/Wire, Standard/Twist Knot, Steel Fill
Weiler® 13015 Single Row Cup Brush, 2-3/4 in Dia Brush, M10x1.25 Arbor Hole, 0.014 in Dia Filament/Wire, Standard/Twist Knot, Steel Fill
Kuri Tec® SPHM150 SPHM Mender, 1-1/2 in Nominal, Import
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
