NIBCO AP-61-101-01 In-Line Check Valve, 1/4 in Nominal, FNPT End Style, 0.85 gpm Flow Rate, Bronze Body, Domestic
Apollo™ CVB Ball Cone® Check Valves offer reliable protection against reverse flow and exceptional resistance to chemicals and corrosion using proven ASTM quality materials made in the USA.
-
BrandApollo™
-
UPC670750631825
-
Manufacturer Part Number6110101
-
CountryUSA
-
Low Lead ComplianceNo
-
Temperature Rating406 deg F
-
Pressure Rating400 psi CWP
-
Flow Rate0.85 gpm
-
MediaLiquid/Steam
-
Trim Material316 Stainless Steel Spring/Brass Stem
-
Actuator TypeSpring
-
Nominal Size1/4 in
-
Series61-100
-
Inlet to Outlet Length2.06 in
-
Dimensions1.12 in H
-
Domestic/ImportDomestic
-
Body MaterialBronze
-
End StyleFNPT
- Tight shut-off with liquid media
- Flow straight-through design efficiency
- RPTFE Ball Cone for chemical resistance
- Well-suited for a broad range of applications, including saturated steam and chemical service
- 100% factory tested
- May be installed in both horizontal and vertical flow with upward flow, do not use for reciprocating air compressor service
- 400 psi at 100 deg F, 125 psi Steam at 350 deg F
- cast bronze construction
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | A6110101 |
-
UNSPSC40141600
-
Package Description100/BX
-
Standards/ApprovalsASTM B16 Brass Retainer/Stem|AISI 316 Stainless Steel Spring|CRN 0C11218.5C|PROP65: Cancer and Reproductive Harm
-
Warranty5 Years
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
NIBCO AP-61-101-01 In-Line Check Valve, 1/4 in Nominal, FNPT End Style, 0.85 gpm Flow Rate, Bronze Body, Domestic
Apollo™ CVB Ball Cone® Check Valves offer reliable protection against reverse flow and exceptional resistance to chemicals and corrosion using proven ASTM quality materials made in the USA.
Hougen® 10532 Pilot, For Use With Rotabroach® 12000 Series 7/16 to 9/16 in (12 to 15 mm) Annular Cutter, Steel
Browning® 767735 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 7/8 in Dia Bore, 3-11/16 to 4-9/16 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-13/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767349 VPE 100 Intermediate Duty Pillow Block Ball Bearing, 1-7/16 in Dia Bore, 4-5/8 to 5-3/8 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-3/4 in OAL x 3-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767673 VPLS 100 Intermediate Duty Pillow Block Ball Bearing, 1/2 in Dia Bore, 3-3/16 to 4-1/16 in L Bolt Center-to-Center, 1-1/16 in Base to Bore Centerline, 4-7/8 in OAL x 2-3/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Milwaukee® Steel Hawg® 49-59-0625 Annular Cutter, 5/8 in Dia Cutter, 1 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
