Apollo™ 6110301 61-100 In-Line Check Valve, 1/2 in Nominal, FNPT End Style, 1.4 gpm Flow Rate, Bronze Body, Domestic
Apollo™ CVB Ball Cone® Check Valves offer reliable protection against reverse flow and exceptional resistance to chemicals and corrosion using proven ASTM quality materials made in the USA.
-
BrandApollo™
-
UPC670750631979
-
Manufacturer Part Number6110301
-
CountryUSA
-
Low Lead ComplianceNo
-
Temperature Rating406 deg F
-
Pressure Rating400 psi CWP
-
Flow Rate1.4 gpm
-
MediaLiquid/Steam
-
Trim Material316 Stainless Steel Spring/Brass Stem
-
Actuator TypeSpring
-
Nominal Size1/2 in
-
Series61-100
-
Inlet to Outlet Length2.31 in
-
Dimensions1.12 in H
-
Domestic/ImportDomestic
-
Body MaterialBronze
-
End StyleFNPT
- Tight shut-off with liquid media
- Flow straight-through design efficiency
- RPTFE Ball Cone for chemical resistance
- Well-suited for a broad range of applications, including saturated steam and chemical service
- 100% factory tested
- May be installed in both horizontal and vertical flow with upward flow, do not use for reciprocating air compressor service
- 400 psi at 100 deg F, 125 psi Steam at 350 deg F
- cast bronze construction
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | A6110301 |
-
UNSPSC40141600
-
Package Description100/BX
-
Standards/ApprovalsASTM B16 Brass Retainer/Stem|AISI 316 Stainless Steel Spring|CRN 0C11218.5C|PROP65: Cancer and Reproductive Harm
-
Warranty5 Years
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
Apollo™ 6110301 61-100 In-Line Check Valve, 1/2 in Nominal, FNPT End Style, 1.4 gpm Flow Rate, Bronze Body, Domestic
Apollo™ CVB Ball Cone® Check Valves offer reliable protection against reverse flow and exceptional resistance to chemicals and corrosion using proven ASTM quality materials made in the USA.
IDEAL® 30-072 72B® Flame-Retardant Wire Connector, Positive Grip Shell, Fixed/Square Wire Spring, 22 to 14 AWG Wire Solid/Stranded Copper Wire, Polypropylene
The IDEAL Wire-Nut Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.With a fixed, square-wire spring and a positive grip shell, the Wire-Nut is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.With five color-coded models available, Wire-Nut Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.Additionally, Models 71B, 72B, and 73B, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
Makita® 5007F Circular Saw Kit, 7-1/4 in Blade, 5/8 in Arbor/Shank, 1-3/4 in at 45 deg, 2-3/8 in at 90 deg Cutting, Right Blade Side
Makita® engineered the 7-1/4 in circular saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications. Makita® built 15 A motor the 5007F has a powerful 15 A motor and a high power-to-weight ratio, with all ball bearing construction and a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The 5007F has a large cutting capacity (2-3/8 in at 90 deg, 1-3/4 in at 45 deg) with a maximum bevel capacity of 0 to 45 deg for the most common angles. Ease-of-use features Makita® engineered ease-of-use features into the saw with large and easy-to-read markings on the depth and bevel scales. Blade changes are more convenient with a flat motor housing design for increased stability when changing blades, with a conveniently located shaft lock for easy blade replacement. Visibility is improved with two built-in LED lights and a built-in dust blower engineered to clear the line of cut. Includes carbide tipped framing blade the 5007F includes a Makita® 7-1/4 in 24T general contractor framing blade for faster, cleaner cuts. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita® heat vents strategically set to dissipate heat and increase cutting performance. The 5007F also includes a blade wrench attached to the saw for fast and convenient blade changing. Engineered for a range of applications the 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4 in circular saw.
Crosby® 1018419, G209-3/8, Anchor Shackle, 1 ton Load, 3/8 in, 0.44 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018419 Anchor Shackle, 1 ton Load, 3/8 in, 0.44 in Dia Screw Pin, Hot Dipped Galvanized
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
SV100HD | Safety Pop-Off Valve | Heavy Duty, High Capacity | 1/2" Male NPT | 100 PSI Preset Pressure | 208 SCFM | Brass
