Brady® 65693 Standard Ball Valve Lockout, Fits Min Handle Size: 2.1 in W x 0.43 in THK, Fits Max Handle Size: 1.62 in W x 0.43 in THK, Fits Min Pipe Size: 1-1/4 in, Fits Max Pipe Size: 3 in, 7 Padlocks, -40 deg F Min Temperature, 347 deg F Max
The easy-to-use, single piece design of Ball Valve Lockouts from Brady® makes them the perfect tool for securing your valve handles in the off position.
-
BrandBrady®
-
UPC754473656935
-
Manufacturer Part Number65693
-
CountryUSA|Canada
-
Fits Maximum Handle Size1.62 in W x 0.43 in THK
-
Fits Minimum Handle Size2.1 in W x 0.43 in THK
-
MaterialLOTO-23 Steel
-
Maximum Number of Padlocks7
-
Maximum Temperature347 deg F
-
ColorRed
-
TypeStandard
-
Minimum Temperature-40 deg F
-
Padlock Shackle Maximum Diameter3/8 in
- Locks out ball valve sizes from 1.25 in to 3 in
- Made of powder-coated steel for superior rust resistance
- Equipping your employees with the proper lockout tools and warning devices can save lives, reduce lost employee time, and cut insurance costs
- Brady is a world leader in lockout/tagout products and services offering industry expertise and a broad range of durable, easy-to-use lockout devices
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 5AT47 |
| Fastenal | 1013885 |
-
Alternative Part Number8385409
-
UNSPSC39121909
-
IDEA Index ID8385409
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Z244.1|ASSE Z244.1|ECCN: EAR99|NFPA 704|NPCA-HMIS Rating|OSHA 29 CFR 1910.147 (4)(ii)( A)(1)/(c) (5)(ii)(C)(1)|RoHS Directive 2011/65/EU/2015/863|CSA Approved
-
Catalog
-
Technical Bulletin
-
Specification Sheet
Recently Viewed
Brady® 65693 Standard Ball Valve Lockout, Fits Min Handle Size: 2.1 in W x 0.43 in THK, Fits Max Handle Size: 1.62 in W x 0.43 in THK, Fits Min Pipe Size: 1-1/4 in, Fits Max Pipe Size: 3 in, 7 Padlocks, -40 deg F Min Temperature, 347 deg F Max
The easy-to-use, single piece design of Ball Valve Lockouts from Brady® makes them the perfect tool for securing your valve handles in the off position.
LIDS FOR 16C CUPS--CS/1000-WHYL18S >
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
50-B-23-F-3/4 23 Tooth Sprockets For #50
23 TOOTH SPROCKETS FOR #50 CHAIN-IDC50B23F3/4 >
Dichtomatik N70440 O-Ring, 440 Dash Number, 6.725 in ID x 7.275 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik S70114 O-Ring, 114 Dash Number, 0.612 in ID x 0.818 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
