Dichtomatik N70216 O-Ring, 216 Dash Number, 1.109 in ID x 1.387 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 216
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70216
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter1.109 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter1.387 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Browning® 3750072 Taper Bore Bushing, 1-1/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL
5-GRV BANDED B-130 V-BELT-JAS5RB130 >
TK1 Series Safety Glasses with Built on Side Shields Generously Sized Lens Ratcheting temples with adjustable length The TK1 series is an affordable alternative for providing comfort, protection, and style. The TK1 features fully adjustable five position ratchet action temples with extendable length. Other features include a wraparound design and a one-piece polycarbonate lens with integral side shields. The lightweight frame provides added comfort and balance. The polycarbonate lens filters out 99.9 percent of UV radiation that could be harmful to the eyes. Choose the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
Zurn® QickTite® QTC4F Unassembled Test Cap, 3/4 in, FNPT
BANDED V-BELT-JAS12RB105>
