Transfer Pumps
Fluid Transfer Pump
Milwaukee® M18™ 2771-21 Cordless Transfer Pump Kit, 480 gph Flow Rate, 3/4 in Inlet x 3/4 in Outlet, 1/4 hp, Nitrile Rubber/Reinforced Plastic, Import
Faster water transfers, faster service calls. The M18™ transfer pump is the industry's first cordless transfer pump with the fastest setup in the marketplace. With an innovative self-priming pump, you can connect and go quicker than ever. The tool's flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18 Ft. of lift and produces up to 75 Ft. of head height. As a part of the M18™ system of tools, it is powered by REDLITHIUM™ battery packs, which deliver up to 144 gallons moved per charge on a XC extended capacity battery pack included in the kit. On board REDLINK™ Intelligence can recognize when the tool stops moving water and automatically shuts itself off to avoid dry pumping. Additionally, REDLINK™ provides optimized performance, and overload protection abusive situations.
Milwaukee® M18™ 2771-20 Cordless Transfer Pump, 480 gph Flow Rate, 3/4 in Inlet x 3/4 in Outlet, 1/4 hp, Nitrile Rubber/Reinforced Plastic, Import
The MILWAUKEE® M18™ Transfer Pump offers faster water transfers and service calls. This portable water transfer pump is the industry’s first cordless transfer pump, offering the fastest setup. With an innovative self-priming pump, professionals can connect and go quicker than ever. The Milwaukee transfer pump's flexible impeller and powerful pump move water at up to 480 Gal. per hour, generates up to 18 ft. of lift and produces up to 75 ft. of head height. As a part of the M18™ System, REDLITHIUM™ battery packs power the water transfer pump, which delivers up to 240 Gal. moved per charge on an XC5.0 battery pack. Onboard REDLINK™ Intelligence can recognize when the tool stops moving water and automatically shuts itself off to avoid dry pumping. REDLINK™ also provides optimized performance and overload protection in abusive situations.
FILL-RITE® FR4210G Heavy Duty High Flow Transfer Pump, 20 gpm Flow Rate, 1 in MNPT Inlet x 1 in FNPT Outlet, 1/4 hp, Aluminum/Cast Iron
FILL-RITE® FR4210G Heavy Duty High Flow Transfer Pump, 20 gpm Flow Rate, 1 in MNPT Inlet x 1 in FNPT Outlet, 1/4 hp, Aluminum/Cast Iron
BANJO 200-P-6-PRO 2" POLY SELF-PRIMING CENTRIFUGAL PUMP W/6.5 HP BRIGGS AND STRATTON GAS ENGINE 190 GPM
HIGH STRENGTH POLYPROPYLENE PUMP. 6.5 HP BRIGGS & STRATTON GAS ENGINE, CORROSION RESISTANT, LIGHTWEIGHT, EPDM SEALS, LOW MAINTENANCE, LOW OIL SENSOR, OVERHEAD VALVE
-BAJ200P6PRO >
1" NPT FUEL HOSE SWIVEL - APA99000234>
3/4" MANUAL SHUT-OFF FUEL NOZZLE 13/16"-SPOUT - APA99000232>
1" X 20' FUEL TRANSFER HOSE WITH STATIC WIRE - APA98108495>
#1050 DUAL AIR DIAPHRAGM PUMPS-GRC647016>
BSGF-10 GAS ENGINE TRANSFER PUMP-MON616835 >
BSGF8H HONDA DRIVEN TRANSFER PUMP-MON616833 >
3.5-HP BRIGGS BSGF8" CAST IRON PUMP-MON616810 >
REQUIRED FOR USE WITH 12- OR 110-VOLTS ELECTRIC PUMPS. RECOMMENDED FOR DISPENSING GASOLINE, UP TO 15% ETHANOL, DIESEL FUEL, KEROSENE, AND OIL. NOT RECOMMENDED FOR BIO-DIESEL. OIL-RESISTANT TUBE AND COVER. SPIRAL REINFORCED WITH SYNTHETIC YARN. INCLUDES STATIC WIRE BUILT INTO HOSE WALL. COUPLED MALE X MALE WITH A BUILT IN STATIC WIRE DISSIPATES STATIC ELECTRICITY ASSOCIATED WITH ELECTRIC PUMPS.
-JWH574279 >
4-HP 7000-GPH GAS TRANSFER ENGINE PUMP-JWH492353 >
TRANSFERS WATER WHERE YOU NEED IT. USE IN YOUR HOME TO EMPTY WATER BEDS, WASHING MACHINES OR REMOVE WATER FROM POOL COVERS. USE ON THE FARM TO EMPTY STOCK TANKS OR TRANSFER WATER. USE FOR INDUSTRY TO EMPTY FLAT ROOFS OR TRUCK DOCKS. MOVES UP TO 360 GALLON PER HOUR. INCLUDES 2 EXTRA IMPELLERS, 2 GASKETS AND ONE 6'HOME WITH STRAINER.
115V-JWH473707>
115-V ELECTRIC OIL TRANSFER PUMPS-GRC260101>
DIAPHRAGM TRANSFER PUMPS-GRC11202>
Recently Viewed
Milwaukee® 48-20-5045 Heavy Duty Thin Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6159 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
Wilton® B.A.S.H® WL9-20636 Sledge Hammer, 38 in OAL, 6 lb Drop Forged Steel Head, Vulcanized Rubber Handle
At Wilton®, we are on a never-ending journey to create the highest quality, most indestructible tools on the market. On this journey we have managed to design and file patents for the world's most durable hammer with Unbreakable® handle technology, revolutionary design and engineered no-slip rubber grip.
20-V LED AREA LIGHT-BD-DCL050>
TIGHT GRIP SCREW-ON FILE HANDLE FOR 12
" FILES-BRU30575 >
Klein® KTSB14 Step Drill Bit, 3/16 in Dia Min Hole, 7/8 in Dia Max Hole, Steel, 3/8 in Shank
Straight, Double Fluted Step Drill Bits from Klein Tools provide cleaner cutting and drilling. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. 3/8-Inch hex shank is durable, and has a firm, positive grip. Laser-etched markings provide quick size identification on primary holes. This step bit has 12-hole sizes from 3/16-Inch to 7/8-Inch (4.8 to 22.2 mm).
2" X 110-YARDS TAN BOX SEALING TAPE-ATCF502005 >
