24-TOOTH #80-1 CHAIN SPROCKETS IDC 80-B-24-F-1-1/2
24-TOOTH SPROCKET FOR #80-1 CHAIN
Recently Viewed
24-TOOTH #80-1 CHAIN SPROCKETS IDC 80-B-24-F-1-1/2
24-TOOTH SPROCKET FOR #80-1 CHAIN
Proto® J6068C C Micrometer Torque Wrench, 1/2 in Drive, Ratcheting Head, 360 to 1800 in-lb, 10 in-lb, 21-1/2 in OAL
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Dichtomatik S70427 O-Ring, 427 Dash Number, 4.725 in ID x 5.275 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ECC-EZ-205 Dodge® 128961 Metal Detectable Snap On Closed End Cover, 2-11/64 in OD, 3-1/16 in W, High-Density Polyethylene (HDPE) Housing, Blue
All Dodge® E-Z-Kleen® and Ultra Kleen™ bearings include a housing groove to accept a snap-on polymer end cover. These durable covers are easy to install and each is provided with a drain hole to prevent moisture from collecting inside the cover. The snap-on style of end cover incorporates an additional lip on the mounting surface for a rigid fit within the housing. This tight fit creates a better seal prevents movement of the cover during operation and high pressure cleaning. Dodge® snap-on end covers provide positive sealing in wet environments and create safer working conditions by enclosing rotating shafts.
Dodge® 023017 215 Type E-Xtra Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 9.31 to 9.69 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 12 in OAL 6-1/4 in OAH
Dodge® 023017 215 Type E-Xtra Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 9.31 to 9.69 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 12 in OAL x 6-1/4 in OAH
