OIL SEALS
450737 CHICAGO RAWHIDE • Inside Diameter (ID): 2.250 inches (57.1 mm) • Outside Diameter (OD): 3.194 inches (81.1 mm) • Width / Thickness: 0.437 inches (11.1 mm) • Material: Nitrile Rubber (NBR) sealing lip
SEAL TOOLS-INSTALLATION TOOLS-CHO450737>
45070 Oil Seals-4.500" X 5.751" X .438"
OIL SEALS-4.500" X 5.751" X .438"-IMS45070>
45032 Oil Seals-4.500" X 5.626" X .438"
OIL SEALS-4.500" X 5.626" X .438"-CHI45032>
450237 CHICAGO RAWHIDE a heavy-duty Scotseal Wheel Seal Installation Handle.
SEAL TOOLS-OIL SEAL TOOLS-CHI450237>
Recently Viewed
Browning® 767747 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-3/8 to 5-1/16 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 5-15/16 in OAL x 3-5/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Greenlee® 925-1-7/32 925 Ultra Hole Saw With Fixed Pockets, 1-7/32 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 3/8 in Arbor
Greenlee® 925-1-7/32 925 Ultra Hole Saw With Fixed Pockets, 1-7/32 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 3/8 in Arbor
Greenlee® 925-1-3/8 Ultra Hole Saw With Fixed Pockets, 1-3/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
Greenlee® 925-1-3/8 Ultra Hole Saw With Fixed Pockets, 1-3/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
Morse® 116329 MHSA Advanced Hole Saw With Arbor, 2 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHSA32C (116329), 2" (51mm) diameter, arbored, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per card. To optimize performance consider using Morse CUTLUBE (121408).
TPR-ID SPHERICAL ROLLER BEARING - FAF22218K>
Apolloâ„¢ 94VLF10601A 94VLF-A 2-Piece Ball Valve, 1-1/4 in Nominal, Press End Style, Brass Body, Full Port, EPDM/PTFE Softgoods, Import
The Conbraco Internationalâ„¢ 94VLF-A Series Lead Free Two-Piece Press Ball Valve is ideal for installation in most plumbing and heating systems, including potable water.
