OIL SEALS
2.125" X 3.623" X .468" OIL SEAL - NAT455080>
5.875" X 7.125" X .625" OIL SEAL - NAT455075>
4.000" X 5.005" X .468" OIL SEALS-NAT455035>
SCOTSEALS-SCOTSEALS-CHI455031>
3.437" X 5.004" X .468" OIL SEALS-NAT455026>
3.312" X 5.004" X .468" OIL SEAL-NAT455024>
3.187" X 4.254" X .625" OIL SEAL-NAT455017>
2.625" X 3.881" X .468" OIL SEALS-NAT455007>
2.563" X 3.623" X .468" OIL SEAL-NAT455002>
SCOTSEALS-4.500" X 6.441" X .938"-CHI45162>
4.500" X 6.254" X 1.047" SCOTSEALS -CHI45160 >
.968" X 1.503" X .312" OIL SEALS-NAT451583>
SCOTSEALS-4.500" X 6.254" X .750"-CHI45158>
OIL SEALS-4.500" X 6.250" X .500"-CHI45150>
OIL SEALS-4.500" X 6.250" X .500"-IMS45150>
.750" X 1.000" X .630" OIL SEAL-CHI451245 >
4.500" X 6.001" X .500" OIL SEAL-CHI45111 >
OIL SEALS-4.500" X 6.001" X .500"-IMS45110>
4.500" X 6.001" X .500" OIL SEAL-CHI45110 >
SCOTSEALS-4.500" X 5.876" X .984"-IMS45103>
4.500" X 5.876X1.009" SCOTSEAL-CHI45102 >
4.500" X 5.751" X 1.016" SCOTSEAL-CHI45099 >
1.687" X 2.720" X .468" OIL SEALS-NAT450765>
• Inside Diameter (ID): 3.500 inches to 3.750 inches
• Outside Diameter (OD): 5.125 inches to 5.250 inches
• Bolt Hole Configuration: 6 Holes
• Bolt Circle Diameter (BC): 4.500 inches
Recently Viewed
72" X 60" 20000-LB CAPACITY STEEL CURB ALUMINUM DOCKPLATE - VESTAS207260>
Milwaukee® 49-57-1439 Tang Drive Annular Cutter, 1-7/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-7/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
54" X 72" 7000-LB CAPACITY ALUMINUM DOCKPLATE - VESBTA07005472>
Milwaukee® 49-57-0939 Tang Drive Annular Cutter, 15/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 15/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
