08111-VB TRANSCOM OIL SEAL COMPANY
TCM08111VB>
Recently Viewed
TCM08111VB>
Browning® 1296441 T45L Automatic Torque Limiter, 1-1/8 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
3/4"-ID X 5' POLYBUTYLENE TUBE-JWH490024>
This Wagner® WG840464 Multiple Horsepower Direct Drive Furnace Blower Motor, 208-230V, 1075/4 Speed, 1/2HP MAX is specially designed to cover a range of applications. The motor is electrically reversible and features 36 in. leads to ease installation.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
1-1/16" -ID 1-5/16" -OD VITON O-RING
