Browning® 1210301 Minimum Plain Bore Type 2 Spur Gear, 24 Diametral Pitch, 14.5 deg Pressure Angle, 1/4 in W Face, 28 Teeth, 1.167 in Dia Pitch, 3/8 to 5/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289281541
-
Manufacturer Part Number1210301
-
CountryUSA
-
Face Width1/4 in
-
Pitch Diameter1.167 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
Gear Ratio1:1
-
TypeMinimum Plain Bore Type 2
-
Hub Diameter1 in
-
Hub Projection3/8 in
-
Diametral Pitch24
-
Number of Teeth28
-
Outside Diameter1-1/4 in
-
Bore Diameter3/8 to 5/8 in
-
Overall Length5/8 in
- When you think Special Gears - Think Browning
-
Alternative Part NumberNSS2428
-
UNSPSC31171707
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
1-1/16" -ID 1-5/16" -OD VITON O-RING
Rust-Oleum Industrial Choice M1800 System Precision Line Inverted Marking Spray Paint features a fast-drying, water-based formula that creates bold, durable marks for a variety of industries including construction, excavation, surveying, landscaping, utility and more.
1-15/16" -ID 2-1/8" -OD VITON O-RING
Rust-Oleum® Steel-Tech™ 9101402 9100 System Standard Epoxy Mastic Activator, 1 gal Container, Liquid Form, Metallic Gray, 125 to 225 sq-ft/gal Coverage
Browning® 1296516 T55L Automatic Torque Limiter, 1-1/4 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
