2-BOLT FLANGE UNITS
RCJT-50 a premium 2-bolt oval flanged housing bearing unit with a cast iron housing, an eccentric locking collar, and a 50 mm bore.
• Bore / Shaft Diameter (d): 50 mm
• Total Height / Outer Length (H): 190 mm
• Flange Width (L): 116 mm
• Total Unit Thickness (U): 62.2 mm
• Fixation Bolt Centre-to-Centre Distance (J): 157 mm
• Fixation Hole Diameter (N): 14 mm (Uses M12 or 1/2" mounting hardware)
• Basic Dynamic Load Rating (\(C_{r}\)): 35,000 N (35 kN)
• Basic Static Load Rating (\(C_{0r}\)): 23,200 N (23.2 kN)
• Fatigue Load Limit (\(C_{ur}\)): 990 N
• Housing Material: Flake graphite cast iron (cast iron housing)
RCJT-1-7/16 1-7/16"-ID four-bolt square flanged ball bearing unit
• Shaft Diameter (d): 1-7/16 inches (1.4375 in)
• Housing Material: Grey cast iron
• Housing Type: 4-hole square flange assembly
• Locking Mechanism: Eccentric self-locking collar
• Insert Bearing Number: G1107-KRR-B (featuring robust double-lip contact seals)
• Bolt Hole Spacing: 3.626 inches (approx. 92.1 mm) center-to-center
RCJT-1-15/16 two-bolt flanged bearing unit
• Shaft Diameter (d): 1-15/16 inches (1.9375 in)
• Housing Material: Grey cast iron
• Locking Type: Eccentric locking collar
• Relubrication: Built-in grease nipple for simple maintenance through the housing
RCJT-1-1/8 two-bolt flanged ball bearing unit
• Shaft Diameter (d): 1-1/8 inches (1.125 in)
• Housing Material: Grey cast iron
• Housing Type: 2-hole flanged oval configuration
• Locking Device: Eccentric locking collar
• Insert Bearing Number: G1102-KRR-B (featuring robust double-lip contact seals)
RCJT-1-1/2two-bolt flanged ball bearing unit
• Shaft Diameter (d): 1-1/2 inches (1.500 in)
• Housing Material: Grey cast iron
• Housing Type: 2-hole flanged oval configuration
• Locking Device: Eccentric locking collar
• Insert Bearing Number: G1108-KRR-B (featuring double-lip contact seals)
• Relubrication: Integrated grease nipple for simple maintenance through the housing
1/2"-ID 2-BOLT FLANGE UNIT - FAFRCJT1/2>
1"-ID 2-BOLT FLANGE UNIT - FAFRCJT1>
2-BOLT 40-MST BEARING FLANGE--BX/2-IDCPFL203 >
2-3/16" -ID 2-BOLT FLANGE UNIT-FYHNANFL21135 >
2" -ID 2-BOLT FLANGE UNIT-FYHNANFL21132 >
NAN-FL-210-50-MM 50-mm-ID 2-bolt Ball Bearing Flange
50-MM-ID 2-BOLT BALL BEARING FLANGE UNIT - FYHNANFL21050MM>
1-1-1/16" -ID 2-BOLT FLANGE UNIT-FYHNANFL20927 >
1-1/2" -ID 2-BOLT FLANGE UNIT-FYHNANFL20824 >
35-MM-ID 2-BGOLT BB FLANGE UNITS-FYHNANFL20735MM>
1-1/4" -ID 2-BOLT FLANGE UNIT-FYHNANFL20720 >
1-3/16" -ID 2-BOLT FLANGE UNIT-FYHNANFL20619 >
1-1/8" -ID 2-BOLT FLANGE UNIT-FYHNANFL20618 >
5/8" -ID 2-BOLT FLANGE UNIT-FYHNANFL20210 >
KFC-2-45-1.3/16 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
1-3/16"-ID 2-BOLT FLANGE UNITS-MCGKFC2451.3/16>
5/8"-ID 2 BOLT FLANGE UNITS-FAFGVTD5/8>
1"-ID 2 BOLT FLANGE UNITS-FAFGVFTD1>
1"-ID 2-BOLT FLANGE UNITS-FAFGVFTD1>
FLCTE-7/8 light-duty, two-bolt flanged ball bearing unit
• Shaft Diameter (d): 7/8 inch (0.875 in / 22.225 mm)
• Housing Material: Grey cast iron
• Housing Configuration: 2-hole flanged oval (light-duty layout)
• Locking Device: Eccentric locking collar
• Sealing System: Protective P-type contact lip seals
FLCTE-5/8 standard-duty, 2-bolt oval (rhombus) flanged ball bearing unit
• Bore / Shaft Diameter: 5/8 inch (15.875 mm)
• Housing Type: 2-Bolt Flange (Rhombus / Oval design)
• Housing Material: Cast Iron
• Locking Mechanism: Eccentric locking collar
• Sealing Type: Integral lip contact seals (P-seals) on both sides
• Lubrication: Pre-greased and sealed for life (without relubrication facility)
• Bearing Insert: Typically houses an INA RAE-series insert
Recently Viewed
Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
Dodge® 023133 207 Non-Expansion Type E-Xtra Triple Lip Flange Mount Roller Bearing Unit, 2-7/16 in Dia Bore, 4.6 in L Bolt Center-to-Center, 6-1/2 in Dia Bolt Circle, Piloted Flange Mount, 7.63 in OAL/Dia
Dodge® 023133 207 Non-Expansion Type E-Xtra Triple Lip Flange Mount Roller Bearing Unit, 2-7/16 in Dia Bore, 4.6 in L Bolt Center-to-Center, 6-1/2 in Dia Bolt Circle, Piloted Flange Mount, 7.63 in OAL/Dia
5/5-V-1870-F 5-groove 5-v-belt QD F-bushing Sheave
5-GROOVE 5-V-BELT QD F-BUSHING SHEAVE - IDC5/5V1870F>
Gates® Power Transmission Super HC® PowerBand® 5/8V2120 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 212 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HCâ„¢ V-belts also have exclusive Gates construction features for longer life on your drives.
MORSE® 43831 1901 Extra Long Length Non-Center Cutting Single End End Mill, 3/4 in Dia Cutter, 4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6-1/4 in OAL, Bright
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
