Gates® Power Transmission Super HC® PowerBand® 5/8V2120 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 212 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC072053289152
-
Manufacturer Part Number5/8V2120
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness7/8 in
-
MaterialChloroprene
-
Top Width1 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter15.916 in
-
Section Size8V
-
Series9387
-
Number of Ribs5
-
Outside Length212 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93875212
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 5/8V2120 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 212 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
APA® AllGard Protective Apparel 19125BXL 19125 Coverall with Elastic Wrist and Ankle, XL, Blue, SpunBonded Polypropylene/MeltBlown Polypropylene
APA® AllGard Protective Apparel 19125BXL 19125 Coverall with Elastic Wrist and Ankle, XL, Blue, SpunBonded Polypropylene/MeltBlown Polypropylene
FORGED WELD ON BALL SOCKET LIFT ARM-HIG01338 >
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
NIBCO 811-T-1-1/4 811 Small Diameter Lead Free Tee, 1-1/4 in Nominal, DZR Copper, Domestic
The APOLLOPRESS® 811 Small Diameter Press Tee features a lead free dezincification resistant copper body and an EPDM O-Ring. APOLLOPRESS® products are manufactured utilizing proven ASTM materials and standards. Proudly made in the USA.
Browning® Gripbelt® 1060888 Arm Type 16 Single Groove Sheave, Split Taper Bore, 3/4 to 2-11/16 in Dia Bore, 14 in OD, 13.95 in Dia Pitch, 11/16 in W Face
