2-BOLT FLANGE UNITS
RCJT-50 a premium 2-bolt oval flanged housing bearing unit with a cast iron housing, an eccentric locking collar, and a 50 mm bore.
• Bore / Shaft Diameter (d): 50 mm
• Total Height / Outer Length (H): 190 mm
• Flange Width (L): 116 mm
• Total Unit Thickness (U): 62.2 mm
• Fixation Bolt Centre-to-Centre Distance (J): 157 mm
• Fixation Hole Diameter (N): 14 mm (Uses M12 or 1/2" mounting hardware)
• Basic Dynamic Load Rating (\(C_{r}\)): 35,000 N (35 kN)
• Basic Static Load Rating (\(C_{0r}\)): 23,200 N (23.2 kN)
• Fatigue Load Limit (\(C_{ur}\)): 990 N
• Housing Material: Flake graphite cast iron (cast iron housing)
RCJT-1-7/16 1-7/16"-ID four-bolt square flanged ball bearing unit
• Shaft Diameter (d): 1-7/16 inches (1.4375 in)
• Housing Material: Grey cast iron
• Housing Type: 4-hole square flange assembly
• Locking Mechanism: Eccentric self-locking collar
• Insert Bearing Number: G1107-KRR-B (featuring robust double-lip contact seals)
• Bolt Hole Spacing: 3.626 inches (approx. 92.1 mm) center-to-center
RCJT-1-15/16 two-bolt flanged bearing unit
• Shaft Diameter (d): 1-15/16 inches (1.9375 in)
• Housing Material: Grey cast iron
• Locking Type: Eccentric locking collar
• Relubrication: Built-in grease nipple for simple maintenance through the housing
RCJT-1-1/8 two-bolt flanged ball bearing unit
• Shaft Diameter (d): 1-1/8 inches (1.125 in)
• Housing Material: Grey cast iron
• Housing Type: 2-hole flanged oval configuration
• Locking Device: Eccentric locking collar
• Insert Bearing Number: G1102-KRR-B (featuring robust double-lip contact seals)
RCJT-1-1/2two-bolt flanged ball bearing unit
• Shaft Diameter (d): 1-1/2 inches (1.500 in)
• Housing Material: Grey cast iron
• Housing Type: 2-hole flanged oval configuration
• Locking Device: Eccentric locking collar
• Insert Bearing Number: G1108-KRR-B (featuring double-lip contact seals)
• Relubrication: Integrated grease nipple for simple maintenance through the housing
PFL-203 2-bolt 40-mst Bearing
2-BOLT 40-MST BEARING FLANGE--BX/2-IDCPFL203 >
NAN-FL-211-35 2-3/16" -ID 2-bolt Flange
2-3/16" -ID 2-BOLT FLANGE UNIT-FYHNANFL21135 >
NAN-FL-211-32 2" -ID 2-bolt Flange
2" -ID 2-BOLT FLANGE UNIT-FYHNANFL21132 >
NAN-FL-210-50-MM 50-mm-ID 2-bolt Ball Bearing Flange
50-MM-ID 2-BOLT BALL BEARING FLANGE UNIT - FYHNANFL21050MM>
NAN-FL-209-27 1-1-1/16" -ID 2-bolt Flange
1-1-1/16" -ID 2-BOLT FLANGE UNIT-FYHNANFL20927 >
NAN-FL-208-24 1-1/2" -ID 2-bolt Flange
1-1/2" -ID 2-BOLT FLANGE UNIT-FYHNANFL20824 >
NAN-FL-207-35MM 35-mm-ID 2-bgolt Bb Flange
35-MM-ID 2-BGOLT BB FLANGE UNITS-FYHNANFL20735MM>
NAN-FL-207-20 1-1/4" -ID 2-bolt Flange
1-1/4" -ID 2-BOLT FLANGE UNIT-FYHNANFL20720 >
NAN-FL-206-19 1-3/16" -ID 2-bolt Flange
1-3/16" -ID 2-BOLT FLANGE UNIT-FYHNANFL20619 >
NAN-FL-206-18 1-1/8" -ID 2-bolt Flange
1-1/8" -ID 2-BOLT FLANGE UNIT-FYHNANFL20618 >
NAN-FL-202-10 5/8" -ID 2-bolt Flange
5/8" -ID 2-BOLT FLANGE UNIT-FYHNANFL20210 >
KFC-2-45-1.3/16 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
1-3/16"-ID 2-BOLT FLANGE UNITS-MCGKFC2451.3/16>
FLCTE-7/8 light-duty, two-bolt flanged ball bearing unit
• Shaft Diameter (d): 7/8 inch (0.875 in / 22.225 mm)
• Housing Material: Grey cast iron
• Housing Configuration: 2-hole flanged oval (light-duty layout)
• Locking Device: Eccentric locking collar
• Sealing System: Protective P-type contact lip seals
FLCTE-5/8 standard-duty, 2-bolt oval (rhombus) flanged ball bearing unit
• Bore / Shaft Diameter: 5/8 inch (15.875 mm)
• Housing Type: 2-Bolt Flange (Rhombus / Oval design)
• Housing Material: Cast Iron
• Locking Mechanism: Eccentric locking collar
• Sealing Type: Integral lip contact seals (P-seals) on both sides
• Lubrication: Pre-greased and sealed for life (without relubrication facility)
• Bearing Insert: Typically houses an INA RAE-series insert
Recently Viewed
STRAIGHT-ID SPHERICAL ROLLER BEARING-NTN22308 >
Jones Stephensâ„¢ B90075 1-Piece Ball Valve, 3/4 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
10-PIECE METRIC GEAR WRENCH SET-GRW85090R >
Square Dâ„¢ Homelineâ„¢ HOMT2020 Tandem Miniature Circuit Breaker, 120/240 V AC, 20 A, 10 kA Interrupt, 1 Pole, Thermal Magnetic Trip
Homeline miniature circuit breakers are engineered and designed for fast installation and superior circuit protection. Homeline circuit breakers are designed to plug into Homeline load centers to provide circuit protection. The HOMT circuit breaker is two single pole thermal magnetic circuit breakers manufactured in tandem. This tandem breaker occupies only one HOM pole space. Each single pole HOMT plug in circuit breaker provides an individual switching and tripping action. This tandem HOM plug in miniature tandem breaker with plug in mounting is rated 20A and 20A at 120/240 V. This circuit breaker provides 10 kA breaking capacity. This tandem breaker will accept 14 AWG to 8 AWG copper or aluminum wire. HOMT tandem breakers are UL Listed.
Square Dâ„¢ QO120 Standard 1-Pole Miniature Circuit Breaker, 120/240 V AC, 20 A, 10 kA Interrupt, 1 Poles, Thermal Magnetic Trip
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 1 pole QO circuit breaker is rated at 20A at 120/240VAC. This unit provides 10kA breaking capacity and plug in mounting. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
#60-H RIVETED ROLLER CHAIN >(FT)-REN60H1R >
