V-BELTS BANDED 3V-5V-8V
V-BELTS-PIX8V3350>
2-GRV BANDED B-50 V-BELTS-PIXB50/02>
8 GROOVE BANDED B50 V-BELTS-PIXB50/08>
2-GRV BANDED B56 V-BELT-PIXB56/02>
JASON 3-V-830 RUBBER 83" RUBBER V-BELT. LENGTH X 0.38" WIDTH X 0.31" THICK
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS
-JAS3V830>
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 90" OUTSIDE LENGTH 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3V900 >
JASON 5R5V1320 WEDGE BANDED V-BELT, 5/8 " TOP WD X 132" OL X 17/32" THICK, X5 BANDS
OIL AND HEAT RESISTANT, STATIC DISSIPATING. A RAW EDGE, COGGED CONSTRUCTION FURTHER INCREASES THE EFFECTIVE POWER TRANSMISSION OF DEEP WEDGE V-BELTS.
- JAS5R5V1320>
JASON 8-V-1700 UNIMATCH BANDED DEEP WEDGE V-BELTS, 8V SECTION, NATUAL RUBBER, 170" LONG, 2 RIBS, 1" TOP WIDTH, 7/8" THICK
HIGH POWER CAPABILITY WITH A MORE COMPACE DRIVE, BANDED CONSTRUCTION OF FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER OR COMING OFF OF THE DRIVE. OIL & HEAT RESISTANCT. THE CORD IS MADE OF POLYESTER, THE COVER OF COTTON /POLYESTER BLEND
-JAS8V1700>
PIX 3-V-900/02 3/8" X 90" 3V SECTION WEDGE BANDED V-BELT
3V900/02 BANDED B BELT IS INTERCHANGEABLE WITH BELT NUMBERS 2-R3V900, R3V900-2 & 2/3V900. WEDGE BANDED V BELTS ARE ABLE TO PRODUCT HP RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. HIGH HP RATINGS IS ACHIEVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A SPECIAL HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
-PIX3V900/02 >
PIX 5-V-1600/04 NARROW WEDGE WRAPPED INDUSTRIAL V-BELT, 160" OC, 4 BANDS
4-GRV BANDED 5-V-1600 V-BELT 160"-PIX5V1600/04 >
2-GRV BANDED 3-VX-750 V-BELTS-DAYR3VX7502>
4-GRV BANDED 5-V-1320 V-BELTS-DAYR5V13204>
4-GRV BANDED 5-VX-1900 V-BELTS-DAYR5VX19004>
Recently Viewed
1/2-L 1/2" Class-l Round Linear Shaft (in)
1/2" CLASS-L ROUND LINEAR SHAFT (IN)-THP12L >
FYH® NANF210 50MM NANF Cylindrical Flange Mount Ball Bearing Unit, 50 mm Dia Bore, 4-3/8 in L Bolt Center-to-Center, 4-Bolt Flange Flange Mount, 5-5/8 in OAL/Dia
FYH® NANF210 50MM NANF Cylindrical Flange Mount Ball Bearing Unit, 50 mm Dia Bore, 4-3/8 in L Bolt Center-to-Center, 4-Bolt Flange Flange Mount, 5-5/8 in OAL/Dia
IKO NAX1725Z Combined Needle Roller Bearing With Thrust Ball Bearing and Dust Cover, 17 mm Dia Bore, 26 mm OD, 25 mm W, 12900 N Radial Dynamic/10800 N Axial Dynamic/16300 N Radial Static/14500 N Axial Static Load
IKO manufactures an economical series of Combined Needle Roller Bearings, comprised of both radial and thrust bearings. Caged needle roller bearings act as radial bearings, while thrust ball or roller bearings serve as thrust bearings. This series is available in four styles, including designs that incorporate thrust ball bearings, thrust roller bearings, angular contact ball bearings or three-point contact ball bearings. Applications include machine tools, textile equipment and industrial machinery. Needle roller bearings with thrust ball bearings are designed to handle thrust loads across a wide range of applications.
V-BELTOUTSIDE CIRCUMFERENCE 44.1"-JAS2322V441 >
1-1/4" TIRE VALVE STEMS-PRITR413 >
Leviton® 2533 3-Phase Grounding Cable Mount Locking Connector, 347/600 V AC, 20 A, 4 Poles, 5 Wires, Black/White
Leviton® industry leading locking devices, such as our Black & White® line of industrial grade plugs and connectors and receptacles, offer superior performance, long lasting reliability and other features that are backed by a lifetime warranty.
