V-BELTS BANDED 3V-5V-8V
4-GRV BANDED 5-VX-1900 V-BELTS-DAYR5VX19004>
4-GRV BANDED 5-V-1320 V-BELTS-DAYR5V13204>
2-GRV BANDED 3-VX-750 V-BELTS-DAYR3VX7502>
PIX 5-V-1600/04 NARROW WEDGE WRAPPED INDUSTRIAL V-BELT, 160" OC, 4 BANDS
4-GRV BANDED 5-V-1600 V-BELT 160"-PIX5V1600/04 >
PIX 3-V-900/02 3/8" X 90" 3V SECTION WEDGE BANDED V-BELT
3V900/02 BANDED B BELT IS INTERCHANGEABLE WITH BELT NUMBERS 2-R3V900, R3V900-2 & 2/3V900. WEDGE BANDED V BELTS ARE ABLE TO PRODUCT HP RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. HIGH HP RATINGS IS ACHIEVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A SPECIAL HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
-PIX3V900/02 >
JASON 8-V-1700 UNIMATCH BANDED DEEP WEDGE V-BELTS, 8V SECTION, NATUAL RUBBER, 170" LONG, 2 RIBS, 1" TOP WIDTH, 7/8" THICK
HIGH POWER CAPABILITY WITH A MORE COMPACE DRIVE, BANDED CONSTRUCTION OF FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER OR COMING OFF OF THE DRIVE. OIL & HEAT RESISTANCT. THE CORD IS MADE OF POLYESTER, THE COVER OF COTTON /POLYESTER BLEND
-JAS8V1700>
JASON 5R5V1320 WEDGE BANDED V-BELT, 5/8 " TOP WD X 132" OL X 17/32" THICK, X5 BANDS
OIL AND HEAT RESISTANT, STATIC DISSIPATING. A RAW EDGE, COGGED CONSTRUCTION FURTHER INCREASES THE EFFECTIVE POWER TRANSMISSION OF DEEP WEDGE V-BELTS.
- JAS5R5V1320>
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 90" OUTSIDE LENGTH 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3V900 >
JASON 3-V-830 RUBBER 83" RUBBER V-BELT. LENGTH X 0.38" WIDTH X 0.31" THICK
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS
-JAS3V830>
2-GRV BANDED B56 V-BELT-PIXB56/02>
8 GROOVE BANDED B50 V-BELTS-PIXB50/08>
2-GRV BANDED B-50 V-BELTS-PIXB50/02>
V-BELTS-PIX8V3350>
V-BELTS-PIX8V3000>
V-BELTS-JAS8V3000>
4-GRV BANDED 5-V-2800 V-BELTS-PIX5V2800/04>
V-BELTS-JAS8V2500>
V-BELTS-JAS8V2500>
V-BELTS-PIX8V2240>
5-GRV BANDED 8-V-2120 V-BELT 212"-PIX8V2120/05 >
V-BELTS-JAS8V2120>
12-GRV BANDED 8-V-2000 V-BELTS-PIX8V2000/12>
12-GRV BANDED 8-V-1900 V-BELTS-PIX8V1900/12>
8-GRV BANDED 8-V-1900 V-BELTS-PIX8V1900/08>
Recently Viewed
Deltrol EF30B Valve Specs Port Size: 1/2" female NPTF Max Flow: 12.0 GPM Max Pressure: 2,000 PSI Type: Inline brass flow control with needle and check valve
Proto® TorquePlus™ J5314 Deep Length Socket, Imperial, 1/2 in Square Drive, 7/16 in
GEARWRENCH® 9521ND Reversible Combination Wrench, 11/32 in Wrench, 12 Points, 15 deg Offset, 5.795 in OAL, Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
MDGET OPN END 15&80D 10-MM - ALL66310 >
5/16" SYS-7 TRANSPORT CHAIN (FT)-PEE5/16SYS7 >
1-1/4" X 1/2" - DRIVE 6" PT. STANDARD LENGTH SOCKET-ARS12040 >
