V-BELTS BANDED 3V-5V-8V
JASON 3-V-830 RUBBER 83" RUBBER V-BELT. LENGTH X 0.38" WIDTH X 0.31" THICK
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS
-JAS3V830>
JASON 4R3V900 4-GROOVE BANDED V-BELT, 3/8" X 90 OC
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 90" OUTSIDE LENGTH 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3V900 >
JASON 5R5V1320 WEDGE BANDED V-BELT, 5/8 " TOP WD X 132" OL X 17/32" THICK, X5 BANDS
OIL AND HEAT RESISTANT, STATIC DISSIPATING. A RAW EDGE, COGGED CONSTRUCTION FURTHER INCREASES THE EFFECTIVE POWER TRANSMISSION OF DEEP WEDGE V-BELTS.
- JAS5R5V1320>
JASON 8-V-1700 UNIMATCH BANDED DEEP WEDGE V-BELTS, 8V SECTION, NATUAL RUBBER, 170" LONG, 2 RIBS, 1" TOP WIDTH, 7/8" THICK
HIGH POWER CAPABILITY WITH A MORE COMPACE DRIVE, BANDED CONSTRUCTION OF FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER OR COMING OFF OF THE DRIVE. OIL & HEAT RESISTANCT. THE CORD IS MADE OF POLYESTER, THE COVER OF COTTON /POLYESTER BLEND
-JAS8V1700>
PIX 3-V-900/02 3/8" X 90" 3V SECTION WEDGE BANDED V-BELT
3V900/02 BANDED B BELT IS INTERCHANGEABLE WITH BELT NUMBERS 2-R3V900, R3V900-2 & 2/3V900. WEDGE BANDED V BELTS ARE ABLE TO PRODUCT HP RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. HIGH HP RATINGS IS ACHIEVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A SPECIAL HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
-PIX3V900/02 >
PIX 5-V-1600/04 NARROW WEDGE WRAPPED INDUSTRIAL V-BELT, 160" OC, 4 BANDS
4-GRV BANDED 5-V-1600 V-BELT 160"-PIX5V1600/04 >
R-3-VX-750-2 2-grv Banded 3-vx-750
2-GRV BANDED 3-VX-750 V-BELTS-DAYR3VX7502>
R-5-V-1320-4 4-grv Banded 5-v-1320
4-GRV BANDED 5-V-1320 V-BELTS-DAYR5V13204>
R-5-VX-1900-4 4-grv Banded 5-vx-1900
4-GRV BANDED 5-VX-1900 V-BELTS-DAYR5VX19004>
Recently Viewed
12-GRV BANDED 8-V-1250 V-BELT-PIX8V1250/12>
1/2" X 12" M/D OVAL DIE SPRINGS-LANSMDO5001200 >
Gates® Power Transmission PowerGrip® 900L050 Light Timing Belt, 1/2 in W, 90 in OAL, 3/8 in Pitch, 240 Teeth, Neoprene
The trapezoidal tooth profile of PowerGripâ„¢ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
2" -MALE PIPE THREADX1-1/4" -FEMALE PIPE THREAD BLACK BUSHING-FIT2X11/4BB >
Koyo HJ-243320.2RS Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/2 in Dia Bore, 2-1/16 in OD, 1-1/4 in W, 10700 lbf Dynamic/16300 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
1/2" X 3-1/2" M/D OVAL DIE SPRINGS-LANSMDO500350 >
