"PIX A-33-K--TOP WIDTH- 0.5"", 5/16"" THICKNESS, 35"" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA33K>
Recently Viewed
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA33K>
The DWE43144N 6 in high performance cut-off/grinder with E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. Dust Ejection System™ technology clears dust and debris for extra protection. Power tool shuts off before overheating with Power-Off® advanced overload protection.
Southwire® Titan2® 55094003 Type LTM-EF Liquid Tight Flexible Metal Conduit, 3/4 in Trade, 0.82 to 0.84 in ID x 1.03 to 1.05 in OD, 100 ft L, Aluminum/Steel
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
U.S. Tsubaki #80-ROLLER-CHAIN ATTACHMENT LINKS UST 80-D-3-CL
Tsubaki® 80D3CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
• Dimensions: 1/4 inch wide by 18 inches long.
• Abrasive Grade: 80 Grit (Fine/Medium finishing).
• Grain Material: Semi-friable 1A-X Aluminum Oxide (designed to fracture cleanly during use to maintain sharp cutting edges rather than glazing over).
• Backing Fabric: X-weight heavy cotton cloth backing (engineered to retain structural tension without warping or tearing on narrow band file arms).
OIL SEALS-4.750" X 6.250" X .500"-IMS47583>
