60020 SAIT premium 1/4" x 18" Aluminum Oxide File Sander Belt.
• Dimensions: 1/4 inch wide by 18 inches long.
• Abrasive Grade: 80 Grit (Fine/Medium finishing).
• Grain Material: Semi-friable 1A-X Aluminum Oxide (designed to fracture cleanly during use to maintain sharp cutting edges rather than glazing over).
• Backing Fabric: X-weight heavy cotton cloth backing (engineered to retain structural tension without warping or tearing on narrow band file arms).
Recently Viewed
• Dimensions: 1/4 inch wide by 18 inches long.
• Abrasive Grade: 80 Grit (Fine/Medium finishing).
• Grain Material: Semi-friable 1A-X Aluminum Oxide (designed to fracture cleanly during use to maintain sharp cutting edges rather than glazing over).
• Backing Fabric: X-weight heavy cotton cloth backing (engineered to retain structural tension without warping or tearing on narrow band file arms).
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB67K>
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA84K>
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA79K>
PIX A-137 IS A CLASSICAL V-BELT 139" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA137 >
