POLY-V V-BELTS J-K-L-M

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS340J4 >

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS340J6 >

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS380J6 >

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS390J6 >

CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS4036V574 >

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS460J6 >

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS470J6 >

POLY-V BELTS ARE DESIGNED TO WORK ON HEAVY DUTY APPLICATIONS SUCH AS POWER TOOL BELTS, COMPRESSOR BELTS, FITNESS DRIVE BELTS, AND ELECTRIC MOTOR DRIVE BELTS. MADE OF POLYBUTADIENE THE CORD OF POLYESTER.
-JAS505J6 >

POLY-V BELTS ARE DESIGNED TO WORK ON HEAVY DUTY APPLICATIONS SUCH AS POWER TOOL BELTS, COMPRESSOR BELTS, FITNESS DRIVE BELTS, AND ELECTRIC MOTOR DRIVE BELTS. MADE OF POLYBUTADIENE THE CORD OF POLYESTER.
-JAS520J6 >

COMPOUND NATURAL RUBBER/SBR CORE: POLYESTER, COVER; COTTON/POLYESTER BLEND. FRACTIONAL HORSEPOWER V-BELT. CRAFTED FOR DURABLE PERFORMANCE IN HUMID ENVIRONMENTS. REINFORCED RUBBER CONSTRUCTION IS BUILT TO LAST.
- JAS5L230>

BELT IS MADE OF FLEXIBLE NEOPRENE BACKING, FIBERGLASS TENSILE CORD AS REINFORCEMENT. THESE BELTS OFF A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. THE BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST.
-JAS615L10 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL--JAS730H200 >

OUTSIDE LENGTH 14", TOP WIDTH 0.550", V-BELT SECTION -J, 6 RIBS, MADE OF EPDM
- PIX140J6>

V-BELT SECTION; J, 10 RIBS, MADE OF EPDM MATERIAL RAW EDGE/RIBBED, 20" OUTSIDE LENGTH
- PIX200J10>

EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX220J10 >

EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX220J4 >

J-SERIES, POLY-V STYLE; 3/32" PITCH, 23" PITCH LENGTH; 2-1/4" BELT WIDTH, 24 BANDS, POLYESTER TENSILE MATERIAL
- PIX230J24>

EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS. -PIX230J4>

PIX 230-J-6 RUBBER POLY V BELTS, 6 RIBS PJ V-RIBBED BELT, 23" LENGTH X 0.55" WIDTH X 0.14" THICK, INDUSTRIAL TRANSMISSION DRIVE BELT
- PIX230J6>

ANSI POLY-V BELT, J-TOOTH PROFILE, 16 RIBS, 24" LONG, MADE OF NEOPRENE
-PIX240J16 >

EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX240J4 >

EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX240J6 >

16 RIBS, 3...5MM, 0.14"/3.30MM THICK, BELT MADE OF POLYESTER CORD, THE PITCH WIDTH IS 0.092"/2.34MM
- PIX250J16>

EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
- PIX250J4>