POLY-V V-BELTS J-K-L-M
JASON 340J4 10-RIB POLY-V V-BELT; J4 3/32" X 34"
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS340J4 >
JASON 340J6 10-RIB POLY-V V-BELT; J6 3/32" X 34"
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS340J6 >
JASON 380J6 MICRO-V BELT, J SECTION, 380J SIZE, 38" LENGTH, 4/7" WIDTH, 6-RIB
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS380J6 >
JASON 390J6 MICRO-V BELT, J SECTION, 390J SIZE, 39" LENGTH,.552 " TOP WIDTH, .138 " THICK. 6 RIBS
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS390J6 >
JASON 4036V574 VARIABLE SPEED BELT, 4036V SERIES, 2-1/2 " TOP WIDTH X 57.40 " PITCH LENGTH, 36" SHEAVE ANGLE
CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS4036V574 >
JASON 460J6 POLY-V 3/32 " PITCH;46" BELT PITCH LENGTH; 9/16" BELT WIDTH; 6 BANDS;
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS460J6 >
JASON 470J6 POLY-V 3/32 " PITCH;47" BELT PITCH LENGTH; 9/16" BELT WIDTH; 6 BANDS;
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS470J6 >
JASON 505J6 POLY-V RIB BELT. 50.5" LENGTH, 6-RIB BELT.
POLY-V BELTS ARE DESIGNED TO WORK ON HEAVY DUTY APPLICATIONS SUCH AS POWER TOOL BELTS, COMPRESSOR BELTS, FITNESS DRIVE BELTS, AND ELECTRIC MOTOR DRIVE BELTS. MADE OF POLYBUTADIENE THE CORD OF POLYESTER.
-JAS505J6 >
JASON 520J6 POLY-V RIB DRIVE BELT. 52" LENGTH, 6-RIB BELT. 6-RIBS
POLY-V BELTS ARE DESIGNED TO WORK ON HEAVY DUTY APPLICATIONS SUCH AS POWER TOOL BELTS, COMPRESSOR BELTS, FITNESS DRIVE BELTS, AND ELECTRIC MOTOR DRIVE BELTS. MADE OF POLYBUTADIENE THE CORD OF POLYESTER.
-JAS520J6 >
JASON 5L230 LIGHT DUTY BELT 23" X 21/32" " TOP WIDTH, 13/32" THICKNESS
COMPOUND NATURAL RUBBER/SBR CORE: POLYESTER, COVER; COTTON/POLYESTER BLEND. FRACTIONAL HORSEPOWER V-BELT. CRAFTED FOR DURABLE PERFORMANCE IN HUMID ENVIRONMENTS. REINFORCED RUBBER CONSTRUCTION IS BUILT TO LAST.
- JAS5L230>
JASON 6151L10 MICRO-V BELT 48-MM WIDTH 10 RIBS
BELT IS MADE OF FLEXIBLE NEOPRENE BACKING, FIBERGLASS TENSILE CORD AS REINFORCEMENT. THESE BELTS OFF A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. THE BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST.
-JAS615L10 >
JASON 730-H-200 1/2-" X 73" LENGTH (H) PITCH STANDARD TIMING BELT
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL--JAS730H200 >
PIX 140-J-6 POLY RIB JBELT, 14", EL-6 RIBS, MATERIAL: EPDM
OUTSIDE LENGTH 14", TOP WIDTH 0.550", V-BELT SECTION -J, 6 RIBS, MADE OF EPDM
- PIX140J6>
PIX 200-J-10 POLY-V 10 RIB BELT. 20" OVERALL LENGTH, METRIC BELT
V-BELT SECTION; J, 10 RIBS, MADE OF EPDM MATERIAL RAW EDGE/RIBBED, 20" OUTSIDE LENGTH
- PIX200J10>
PIX 220-J-10 MICRO-V BELT, J-SECTION, 220J SIZE, 22" LENGTH, 1" WIDTH, 10 RIB
EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX220J10 >
PIX 220-J-4 MICRO-V BELT, J-SECTION, 220J SIZE, 22" LENGTH, 3/81" WIDTH, 4 RIB
EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX220J4 >
PIX 230-J-24 POLY-V STYLE' 3/32" , PITCH; 23", PITCH LENGTH; 2-1/4" BELT WIDTH, 24 BANDS
J-SERIES, POLY-V STYLE; 3/32" PITCH, 23" PITCH LENGTH; 2-1/4" BELT WIDTH, 24 BANDS, POLYESTER TENSILE MATERIAL
- PIX230J24>
PIX 230-J-4 POLY RIB J BELT, 23" , EL-4 RIB
EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS. -PIX230J4>
PIX 230-J-6 RUBBER POLY V BELTS, 6 RIBS PJ V-RIBBED BELT, 23" LENGTH X 0.55" WIDTH X 0.14" THICK, INDUSTRIAL TRANSMISSION DRIVE BELT
PIX 230-J-6 RUBBER POLY V BELTS, 6 RIBS PJ V-RIBBED BELT, 23" LENGTH X 0.55" WIDTH X 0.14" THICK, INDUSTRIAL TRANSMISSION DRIVE BELT
- PIX230J6>
PIX 240-J-16 ANSI POLY-V BELTS, J TOOTH PROFILE, 16 RIBS, 24 INCHES LONG, 0.092 INCH PITCH
ANSI POLY-V BELT, J-TOOTH PROFILE, 16 RIBS, 24" LONG, MADE OF NEOPRENE
-PIX240J16 >
PIX 240-J-4 POLY-V RIBBED BELT 4 RIBS, 24" LENGTH X 0.37" WIDTH X 0.14" HEIGHT, EPDM POLY V BELT, MULTI WEDGE MICRO V SERPENTINE BELT
EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX240J4 >
PIX 240-J-6 POLY-V RIBBED BELT 6 RIBS, 24" LENGTH X 0.550" TOP WIDTH MADE OF EPDM
EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
-PIX240J6 >
PIX 250-J-16 POLY V-BELT 16 RIB LENGTH 25.0"
16 RIBS, 3...5MM, 0.14"/3.30MM THICK, BELT MADE OF POLYESTER CORD, THE PITCH WIDTH IS 0.092"/2.34MM
- PIX250J16>
PIX 250-J-4 POLY RIB J V-BELT, 25" EL-4 RIB
EPDM FOR RESISTANCE TO WEATHERING, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEEDS. FIBER-REINFORCED RIBS FOR RESISTANCE TO WEAR. SMOOTH RUNNING FOR MINIMAL VIBRATION AT HIGH SPEEDS. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS.
- PIX250J4>
Recently Viewed
Leviton® 4880-C 3-Phase Non-Grounding Cable Mount Locking Plug, 250 V AC, 15 A, 3 Poles, 3 Wires, Black/White
Leviton® industry leading locking devices, such as our Black & White® line of industrial grade plugs and connectors and receptacles, offer superior performance, long lasting reliability and other features that are backed by a lifetime warranty.
METRIC TAPERED ROLLER BEARING SET-NTN32004X >
V-BELTOUTSIDE CIRCUMFERENCE 32.6"-JAS2230V326 >
GP® 3024M Standard Length Socket, 3/4 in, 24 mm Hex Socket, 6 Points
1-1/2" -ID 4-BOLT FLANGE UNIT-FAFRCJ11/2 >
Milwaukee® 49-59-2113 Annular Cutter, 1-1/8 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
