CAM & YOKE FOLLOWER BEARINGS
YR-7/8-X 7/8"-OD Sealed Yoke Cam Followers
7/8"-OD SEALED YOKE CAM FOLLOWERS
YR-2-1/4-X 2-1/4" Sealed Yoke Cam Follower
2-1/4" SEALED YOKE CAM FOLLOWER - SMIYR21/4X>
YR-1-3/4-X 1-3/4" Sealed Yoke Cam Follower
1-3/4" SEALED YOKE CAM FOLLOWER - SMIYR134X >
VCF-5-1/2 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
5-1/2" V-GROOVED ROLLERS W/STUDS-MCGVCF51/2>
VCF-3-1/2 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
3-1/2" V-GROOVE ROLLERS W/STUDS-MCGVCF31/2>
VCF-2-1/2 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
2-1/2" V-GROOVE ROLLERS W/STUDS-MCGVCF21/2>
TRD-2233 Angular Contact Thrust Bearing Washers
ANGULAR CONTACT THRUST BEARING WASHERS-TORTRD2233 >
SRF-80 4"-OD Unsealed Yoke Cage Roller Cam Follower
4"-OD UNSEALED YOKE CAGE ROLLER CAM FOLLOWER - RBCSRF80>
SK-1104 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
FLAT CAM FOLLOWERS-MCGSK1104>
RF-36-PP 2-1/4" Sealed Yoke Cam Follower
2-1/4" SEALED YOKE CAM FOLLOWER - INARF36PP>
RF-32-PP 2"-OD a premium, inch-series yoke-type track roller (cam follower
• Roller Outside Diameter (D): 2.000 in (50.80 mm)
• Inner Bore Diameter (I.D.): 0.625 in / 5/8 in (15.875 mm)
• Roller Face Width: 1.250 in / 1-1/4 in (31.75 mm)
• Overall Width: 1.250 in (31.75 mm)
• Rolling Element Internal Layout: Full-Complement Needle Rollers (No cage separating the internal rollers, allowing a maximized roller count for exceptional load capacity and impact protection).
• Outer Ring Geometry: Cylindrical (Flat outer diameter profile to spread extreme contact forces evenly across true track surfaces).
• Basic Dynamic Load Capacity: 10,300 lbf (45.8 kN)
• Basic Static Load Capacity: 16,600 lbf (73.8 kN)
• Limiting Speed Threshold: 2,300 RPM
RF-30-PP 1-7/8"-OD a premium, inch-series yoke-type track roller (cam follower)
• Roller Outside Diameter (D): 1.875 in / 1-7/8" (47.625 mm)
• Inner Bore Diameter (I.D. / d): 0.500 in / 1/2" (12.700 mm)
• Roller Width (B): 1.000 in / 1" (25.400 mm)
• Internal Rolling Layout: Full-Complement Needle Rollers (This cage-less design packs the maximum number of needle rollers inside the casing, providing exceptional radial load-bearing capacity and robust shock resistance).
• Outer Ring Surface Geometry: Cylindrical / Flat (Maximizes physical track-to-roller contact area to distribute heavy workloads evenly across perfectly parallel rails).
• Suffix Designation (PP): Formed dual lip seals on both sides consisting of zinc-plated sheet steel washers with an integrated NBR sealing part. It seals factory grease inside while functioning over a temperature threshold of -30°C to +100°C.
RF-28-PP 1-3/4"-ODa premium, inch-series yoke-type track roller (cam follower).
• 1.750 in / 1-3/4" (44.450 mm)
• Inner Bore Diameter (I.D. / d): 0.500 in / 1/2" (12.700 mm)
• Roller Face Width (W / B): 1.000 in / 1" (25.400 mm)
• Internal Rolling Layout: Full-Complement Needle Rollers. The absence of a traditional separation cage allows the maximum number of needle rollers to be packed inside. This design maximizes radial load capacity and provides high shock resistance.
• Outer Ring Profile: Cylindrical / Flat. The completely flat exterior surface geometry maximizes track contact to evenly distribute intense point-loading forces across straight rails.
RF-26-PP 1-5/8"-OD a premium, inch-series yoke-type track roller (cam follower)
• Roller Outside Diameter (D): 1.625 in / 1-5/8" (41.275 mm)
• Inner Bore Diameter (I.D. / d): 0.4375 in / 7/16" (11.113 mm)
• Roller Face Width (W / B): 0.9375 in / 15/16" (23.813 mm)
• Total Overall Width: 0.9375 in (23.813 mm)
• Internal Rolling Layout: Full-Complement Needle Rollers. The cage-less design packs the maximum amount of needle rolling elements inside the casing, yielding exceptional radial load-carrying capacity and high shock resistance.
• Outer Ring Profile: Cylindrical / Flat. The completely flat exterior geometry maximizes surface-to-track contact to distribute heavy workloads evenly across straight rails.
• Component Weight: ~0.45 lbs (0.20 kg)
RF-24-PP 1-1/2"-OD a premium, inch-series yoke-type track roller (cam follower)
• Roller Outside Diameter (D): 1.500 in / 1-1/2" (38.100 mm)
• Inner Bore Diameter (I.D. / d): 0.4375 in / 7/16" (11.113 mm)
• Roller Face Width (B): 0.9375 in / 15/16" (23.810 mm)
• Outer Ring Width (C): 0.875 in / 7/8" (22.225 mm)
• Internal Rolling Layout: Full-Complement Needle Rollers. The cage-less design packs the maximum number of needle elements inside the casing, yielding exceptional radial load-carrying capacity and high shock resistance.
• Outer Ring Profile: Cylindrical / Flat. The completely flat exterior geometry maximizes surface-to-track contact area, distributing heavy workloads evenly across straight, parallel rails.
• Limiting Speed Threshold: 3,400 RPM (under stable grease lubrication)
• Component Weight: ~0.186 kg (0.41 lbs)• Roller Outside Diameter (D): 1.500 in / 1-1/2" (38.100 mm)
• Inner Bore Diameter (I.D. / d): 0.4375 in / 7/16" (11.113 mm)
• Roller Face Width (B): 0.9375 in / 15/16" (23.810 mm)
• Outer Ring Width (C): 0.875 in / 7/8" (22.225 mm)
• Internal Rolling Layout: Full-Complement Needle Rollers. The cage-less design packs the maximum number of needle elements inside the casing, yielding exceptional radial load-carrying capacity and high shock resistance.
• Outer Ring Profile: Cylindrical / Flat. The completely flat exterior geometry maximizes surface-to-track contact area, distributing heavy workloads evenly across straight, parallel rails.
• Limiting Speed Threshold: 3,400 RPM (under stable grease lubrication)
• Component Weight: ~0.186 kg (0.41 lbs)
Recently Viewed
Proto® TorquePlus™ J07522M Standard Length Socket, Metric, 3/4 in Square Drive, 22 mm
PRIMER BULB-MED49020 >
Porter-Cable® 43180 Router Bit, Wavy Edge Router, 1-1/4 in Dia Cutting, 2-9/32 in OAL, 1/4 in Dia Shank, Carbide
Browning 32-TOOTH #40-1 CHAIN SPROCKETS BRW 4032 X 1.3/16
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
STRETCH FILM HAND WRAPPERS-PAKQSW110 >
BLACK SILICONE TAPE-GNT66260 >
