CAM & YOKE FOLLOWER BEARINGS
RF-22-PP 1-3/8"-OD a premium, inch-series yoke-type track roller (cam follower)
• Roller Outside Diameter (D): 1.3750 in / 1-3/8" (34.925 mm)
• Inner Bore Diameter (I.D. / d): 0.3750 in / 3/8" (9.525 mm)
• Roller Face / Overall Width (B): 0.8125 in / 13/16" (20.638 mm)
• Internal Rolling Layout: Full-Complement Needle Rollers. This cage-less design packs the maximum number of needle rollers directly inside the casing, providing exceptional radial load-carrying capacity and high shock resistance.
• Outer Ring Profile: Cylindrical / Flat. The flat outer geometry maximizes track surface contact area to spread load pressures evenly across parallel rails.
• Sealing Integrity (PP): Consists of two zinc-plated sheet steel washers with an integrated NBR sealing part, axially preloaded to function reliably across a temperature range of -30°C to +100°C (-22°F to +212°F).
• Component Weight: ~0.14 kg (0.31 lbs)
RF-20-PP 1-1/4"-OD premium, inch-series yoke-type track roller (cam follower)
1-1/4"-OD SEALED YOKE CAM FOLLOWER-INARF20PP>
RF-16-PP 1"-OD Sealed Yoke
1"-OD SEALED YOKE CAM FOLLOWERS-INARF16PP>
RF-14-PP 7/8"-OD Sealed Yoke
7/8"-OD SEALED YOKE CAM FOLLOWERS-INARF14PP>
RF-12-PP 3/4"-OD Sealed Yoke
3/4"-OD SEALED YOKE CAM FOLLOWERS-INARF12PP>
PCFE-1-3/4 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
1-3/4" CAM FOLLOWERS-MCGPCFE13/4>
PCF-2-1/2 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
2-1/2" TRAKROL TRACK ROLLERS-MCGPCF21/2>
PCF-1-1/2 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
1-1/2" TARO TRACK ROLLER-MCGPCF11/2 >
PAC-3016 Pacific Bearing Cam Follower
PACIFIC BEARING CAM FOLLOWER - GULPAC3016>
NUTR-20-X INA BEARING premium, inch-series yoke-type track roller (cam follower)
• Roller Outside Diameter (D): 1.250 in / 1-1/4" (31.750 mm)
• Inner Bore Diameter (I.D. / d): 0.3750 in / 3/8" (9.525 mm)
• Roller Face / Overall Width (B): 0.8125 in / 13/16" (20.638 mm) (Note: Some manufacturing dimensional standards allow the overall outer ring track shell width to footprint at 0.750 in / 3/4" depending on total layout tolerance).
• Internal Rolling Layout: Full-Complement Needle Rollers. This cage-less design packs the maximum number of needle rollers directly inside the casing, providing exceptional radial load-carrying capacity and high shock resistance.
• Outer Ring Profile: Cylindrical / Flat. The flat exterior geometry maximizes track surface contact area to spread heavy point-loading pressures evenly across parallel rails.
• Sealing Integrity (PP): Consists of two zinc-plated sheet steel washers with an intermediate NBR sealing part, axially preloaded to function reliably across a temperature threshold of -30°C to +100°C (-22°F to +212°F).
• Component Weight: ~0.10–0.21 kg (~0.22–0.48 lbs)
NUKR-80-A 80-mm-OD A Premium Metric Stud Type
Roller Outside Diameter (D) 80 mm
Stud Thread Fitting Diameter (d₁) 30 mm
Overall Width / Stud Length (B) 100 mm
Outer Ring Cam Width (C) 35 mm
Thread Size Pitch M30 x 1.5
Basic Dynamic Load Rating (\(C_{rw}\)) 71,000 N (~15,900 lbf)
Basic Static Load Rating (\(C_{0rw}\)) 103,000 N (~23,100 lbf)
Limiting Operating Speed (Grease) 1,800 RPM
Total Net Component Weight ~1.64 kg (3.61 lbs)
NATV-6-PP 6-mm ID Yoke Track Ball Bearing
6-MM ID YOKE TRACK ROLLER-GULNATV6PP >
MCFR-52-S MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
52-MM SEALED CAM FOLLOWERS-MCGMCFR52S>
MCF-47-S MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
47-MM SEALED CAM FOLLOWERS-MCGMCF47S>
MCF-16-S MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
16-MM SEALED CAM FOLLOWER-MCGMCF16S >
KRX-17.5X30X41 17.5-mm Cam Follower-ntnkrx17.
17.5-MM CAM FOLLOWER-NTNKRX17.5X30X41 >
KR-35-PP-X 35-mm-OD Stud Type a premium, stud-type cam follower (track roller) featuring a heavily reinforced outer ring.
• Roller Outside Diameter (D): 35 mm
• Roller Width (C): 18 mm
• Stud Fitting Diameter (d₁): 16 mm
• Total Overall Length (B): 52 mm
• Effective Stud Length (B₂): 32.5 mm
• Thread Profile (G): M16 x 1.5
• Thread Length (\(I_{G}\)): 17 mm
• Basic Dynamic Load Rating (\(C_{rw}\)): 9,700 N (9.7 kN)
KR-22-PP 22-mm a premium, metric-series stud-type cam follower (track roller).
• Roller Outside Diameter (D): 22 mm
• Roller Face Width (C): 12 mm
• Stud Fitting/Bore Diameter (d₁): 10 mm
• Effective Stud Length (B₂): 23 mm
• Total Overall Width / Length (B): 36 mm
• Thread Specification (G): M10 x 1
• Thread Engagement Length (\(I_{G}\)): 12 mm
• Internal Rolling Layout: Single-row cage-guided needle rollers. (The inner cage drastically drops operational friction compared to full-complement variations, helping it run much cooler at higher speeds).
• Outer Ring Profile: Crowned / Spherical exterior profile (optimized INA-profile that evenly compensates for minor machine alignment errors).
• Basic Dynamic Load Rating (\(C_{rw}\)): 4,500 N (4.5 kN)
• Basic Static Load Rating (\(C_{0rw}\)): 5,400 N (5.4 kN)
• Limiting Speed Boundary: 8,000 r/min (under permanent grease lubrication)
• Assembling Interface: Built-in hexagon socket hole (5 mm width across flats) located right on the stud head face to easily prevent spin-out with an Allen key during locking.
HR-7/8-XBHex Socket Heavy Cam Follower
7/8" HEX SOCKET HEAVY CAM FOLLOWER
HR-5/8-XB Hex Socket Heavy Cam Followers
5/8" HEX SOCKET HEAVY CAM FOLLOWER
HR-3/4-XB 3/4" Heavy Stud Seal Cam Follower
3/4" HEAVY STUD SEAL CAM FOLLOWERS-SMIHR34XB >
Recently Viewed
72"-H X 48"-W X 24"-D PARCHMENT TAN STORAGE CABINET - HLW425S24PT >
85-MM X 2.00 BEARING LOCKNUT - SNRKM17>
1/2" EMT COMPRESSION CONNECTOR 520497-ELEL21 >
• Bore Diameter (ID): 0.8750 inches (7/8 in)
• Outside Diameter (OD): 2.0000 inches (2 in)
• Width: 0.5625 inches (9/16 in)
• Bore Type: Straight
• Closure Type: Double Shielded (denoted by the "-77" suffix, utilizing two metal shields to block larger dust particles while retaining factory grease)
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL22042RS >
STRAIGHT-ID SPHERICAL ROLLER BEARING-NTN22322 >
