CAM & YOKE FOLLOWER BEARINGS

• Roller Outside Diameter (D): 1.3750 in / 1-3/8" (34.925 mm)
• Inner Bore Diameter (I.D. / d): 0.3750 in / 3/8" (9.525 mm)
• Roller Face / Overall Width (B): 0.8125 in / 13/16" (20.638 mm)
• Internal Rolling Layout: Full-Complement Needle Rollers. This cage-less design packs the maximum number of needle rollers directly inside the casing, providing exceptional radial load-carrying capacity and high shock resistance.
• Outer Ring Profile: Cylindrical / Flat. The flat outer geometry maximizes track surface contact area to spread load pressures evenly across parallel rails.
• Sealing Integrity (PP): Consists of two zinc-plated sheet steel washers with an integrated NBR sealing part, axially preloaded to function reliably across a temperature range of -30°C to +100°C (-22°F to +212°F).
• Component Weight: ~0.14 kg (0.31 lbs)

1-1/4"-OD SEALED YOKE CAM FOLLOWER-INARF20PP>

• Outside Diameter (D): 1.0000 inch (25.4 mm)
• Inside Bore Diameter (d): 0.3125 inches (5/16" or 7.9375 mm)
• Total Width (B): 0.625 to 0.6875 inches (5/8" to 11/16")
• Rolling Elements: Full complement needle rollers (no cage)
• Enclosure Type (PP): "PP" Double lip contact seals on both sides (NBR rubber backed by zinc-plated steel washers) to lock in grease and block deb

• Outside Diameter (D): 0.8750 inches (7/8" or 22.23 mm)
• Inside Bore Diameter (d): 0.2500 inches (1/4" or 6.35 mm)
• Outer Ring Width (B1): 0.5000 inches (1/2")
• Overall Roller Width (B): 0.5625 inches (9/16" or 12.7 mm)
• Rolling Elements: Full complement needle rollers (maximizes load ratings over caged alternatives)
• Enclosure Type (PP): Double-lip contact seals on both sides to keep factory grease clean and lock out debris.
• Outer Ring Shape: Cylindrical / Flat

3/4"-OD SEALED YOKE CAM FOLLOWERS-INARF12PP>

1-3/4" CAM FOLLOWERS-MCGPCFE13/4>

2-1/2" TRAKROL TRACK ROLLERS-MCGPCF21/2>

1-1/2" TARO TRACK ROLLER-MCGPCF11/2 >

PACIFIC BEARING CAM FOLLOWER - GULPAC3016>

• Roller Outside Diameter (D): 1.250 in / 1-1/4" (31.750 mm)
• Inner Bore Diameter (I.D. / d): 0.3750 in / 3/8" (9.525 mm)
• Roller Face / Overall Width (B): 0.8125 in / 13/16" (20.638 mm) (Note: Some manufacturing dimensional standards allow the overall outer ring track shell width to footprint at 0.750 in / 3/4" depending on total layout tolerance).
• Internal Rolling Layout: Full-Complement Needle Rollers. This cage-less design packs the maximum number of needle rollers directly inside the casing, providing exceptional radial load-carrying capacity and high shock resistance.
• Outer Ring Profile: Cylindrical / Flat. The flat exterior geometry maximizes track surface contact area to spread heavy point-loading pressures evenly across parallel rails.
• Sealing Integrity (PP): Consists of two zinc-plated sheet steel washers with an intermediate NBR sealing part, axially preloaded to function reliably across a temperature threshold of -30°C to +100°C (-22°F to +212°F).
• Component Weight: ~0.10–0.21 kg (~0.22–0.48 lbs)

Roller Outside Diameter (D) 80 mm
Stud Thread Fitting Diameter (d₁) 30 mm
Overall Width / Stud Length (B) 100 mm
Outer Ring Cam Width (C) 35 mm
Thread Size Pitch M30 x 1.5
Basic Dynamic Load Rating (\(C_{rw}\)) 71,000 N (~15,900 lbf)
Basic Static Load Rating (\(C_{0rw}\)) 103,000 N (~23,100 lbf)
Limiting Operating Speed (Grease) 1,800 RPM
Total Net Component Weight ~1.64 kg (3.61 lbs)

6-MM ID YOKE TRACK ROLLER-GULNATV6PP >

52-MM SEALED CAM FOLLOWERS-MCGMCFR52S>

47-MM SEALED CAM FOLLOWERS-MCGMCF47S>

16-MM SEALED CAM FOLLOWER-MCGMCF16S >

17.5-MM CAM FOLLOWER-NTNKRX17.5X30X41 >

• Roller Outside Diameter (D): 35 mm
• Roller Width (C): 18 mm
• Stud Fitting Diameter (d₁): 16 mm
• Total Overall Length (B): 52 mm
• Effective Stud Length (B₂): 32.5 mm
• Thread Profile (G): M16 x 1.5
• Thread Length (\(I_{G}\)): 17 mm
• Basic Dynamic Load Rating (\(C_{rw}\)): 9,700 N (9.7 kN)

• Roller Outside Diameter (D): 22 mm
• Roller Face Width (C): 12 mm
• Stud Fitting/Bore Diameter (d₁): 10 mm
• Effective Stud Length (B₂): 23 mm
• Total Overall Width / Length (B): 36 mm
• Thread Specification (G): M10 x 1
• Thread Engagement Length (\(I_{G}\)): 12 mm
• Internal Rolling Layout: Single-row cage-guided needle rollers. (The inner cage drastically drops operational friction compared to full-complement variations, helping it run much cooler at higher speeds).
• Outer Ring Profile: Crowned / Spherical exterior profile (optimized INA-profile that evenly compensates for minor machine alignment errors).
• Basic Dynamic Load Rating (\(C_{rw}\)): 4,500 N (4.5 kN)
• Basic Static Load Rating (\(C_{0rw}\)): 5,400 N (5.4 kN)
• Limiting Speed Boundary: 8,000 r/min (under permanent grease lubrication)
• Assembling Interface: Built-in hexagon socket hole (5 mm width across flats) located right on the stud head face to easily prevent spin-out with an Allen key during locking.

7/8" HEX SOCKET HEAVY CAM FOLLOWER

5/8" HEX SOCKET HEAVY CAM FOLLOWER

5/8" HEAVY SERIES CAM FOLLOWERS

3/4" HEAVY STUD SEAL CAM FOLLOWERS-SMIHR34XB >

3/4" HEAVY STUD/SEAL CAM FOLLOWERS

CAM FOLLOWERS-SMIHR1/2XB>