BALL BEARINGS
DOUBLE SHIELDED BALL BEARING-NTN6008ZZ >
DOUBLE SHIELDED BALL BEARINGS
DOUBLE SEALED BALL BEARINGS WSR
6009-2-RS a standard extra-light duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides
• nside Diameter (Bore): 45 mm (1.772 inches)
• Outside Diameter (OD): 75 mm (2.953 inches)
• Width: 16 mm (0.630 inches)
• Max Speed: ~4,800 to 5,600 RPM (restricted by rubber contact seal friction)
• Material: Premium chrome steel (SAE-52100)
DOUBLE SEALED BALL BEARING-GUL60092RS >
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60092RSNR >
DOUBLE SHIELDED BALL BEARING-GUL60092Z >
DOUBLE SEALED BALL BEARINGS-SNR6009EE>
DOUBLE SEALED BALL BEARING-NTN6009LL >
DOUBLE SHIELDED BALL BEARING-NTN6009ZZ >
DOUBLE SHIELDED BALL BEARINGS
6009-ZZa standard extra-light duty, single-row deep groove precision radial ball bearing equipped with non-contact metal shields on both sides.
• Inside Diameter (Bore): 45 mm (1.772 inches)
• Outside Diameter (OD): 75 mm (2.953 inches)
• Width: 16 mm (0.630 inches)
• Max Speed: Up to 10,000 RPM (lubricated with grease)
• Material: High-quality chrome steel (SAE-52100)
DOUBLE SEALED BALL BEARING
DOUBLE SEALED RADIAL BALL BEARING-GUL60102RS >
6010-2-RSstandard medium-duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides.
• Inside Diameter (Bore): 50 mm (1.969 inches)
• Outside Diameter (OD): 90 mm (3.543 inches)
• Width: 20 mm (0.787 inches)
• Max Speed: ~4,300 to 5,000 RPM (limited by rubber seal friction)
• Material: Premium chrome steel (SAE-52100)
DOUBLE SHIELDED BALL BEARING-GUL60102Z >
DOUBLE SEALED BALL BEARING-NTN6010LL >
DOUBLE OPEN FACE BALL BEARINGS WSR-SNR6010NR>
DOUBLE SEALED BALL BEARINGS WSR-SNR6010NREE>
• nside Diameter (Bore): 50 mm (1.969 inches)
• Outside Diameter (OD): 80 mm (3.150 inches)
• Width: 16 mm (0.630 inches)
• Max Speed: Up to 9,500 RPM (lubricated with grease)
• Material: High-quality chrome steel (SAE-52100)
DOUBLE SHIELDED BALL BEARING-NTN6010ZZ >
DOUBLE SHIELDED BALL BEARINGS
DOUBLE SEALED BALL BEARINGS
DOUBLE SEALED BALL BEARING-GUL60112RS >
Recently Viewed
GP® 2054R Standard Length Socket, 1/2 in, 1-11/16 in Hex Socket, 6 Points
40-B-28-F-1-1/4 28 Tooth Sprockets For #40
28 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B28F11/4 >
5/16" -OD BRASS COMPRESSION NUTS-FTG261X5 >
Morse® 177467 MHS Advanced Hole Saw, 2-7/8 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHS46 (177467), 2-7/8" (73mm) diameter, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per box. Seperate arbor required, use MA35PSN (139052) or MA45PSN (139069). To optimize performance consider using Morse CUTLUBE (121408).
Gates® Power Transmission Tri-Power® BX116 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 119 in L Outside, 13/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
Gates® Power Transmission Predator® BP81 Heavy Duty V-Belt, BP Section, 21/32 in W Top, 84 in L Outside, 13/32 in THK, Chloroprene
Made to take on your toughest jobs, Predator Single & PowerBand banded belts are the market leading heavy duty V-belts. The stronger than steel extra heavy-duty belt construction is designed to handle high horsepower motors, frequent shock loads, high heat and the harshest operating environments in extremely demanding applications. They provide extraordinary high-impact strength, capacity and wear resistance. Unique in their extreme robustness and high load carrying capability, they are unrivaled.
