BALL BEARINGS
15/16" -ID SPHERICAL OD AG BALL BEARING-GUL205PPB7 >
AG BALL BEARING-GUL205RVA >
The MRC 205SFF is a single-row deep groove radial ball bearing manufactured by MRC (a brand of SKF). It belongs to the 200-S Light Series (equivalent to a standard 6205 series bearing) and is heavily utilized for applications managing moderate-to-heavy radial loads, two-directional thrust loads, or a combination of both. Technical Specifications According to data sheets from Motion Industries, the bearing features the following standard dimensions and limits: Bore Diameter (Inner): 25 mm Outside Diameter: 52 mm Overall Width: 15 mm Closure Type: Double shielded ("FF" or "SFF" nomenclature represents two non-contact metal shields) Maximum Speed: 15,000 RPM (Oil) / 12,000 RPM (Grease)Load Capacities: 3,150 lb. radial dynamic / 1,750 lb. radial static Internal Clearance: C3 (standard loose fit for thermal
205-SFF Light Radial Deep Groove Ball Bearing, 25 mm Dia Bore, 52 mm OD, 1 Rows, 15 mm W, 14000 N Dynamic/7800 N Static Load
The MRC 205SFF is a single-row deep groove radial ball bearing manufactured by MRC (a brand of SKF). It belongs to the 200-S Light Series (equivalent to a standard 6205 series bearing) and is heavily utilized for applications managing moderate-to-heavy radial loads, two-directional thrust loads, or a combination of both. Technical Specifications According to data sheets from Motion Industries, the bearing features the following standard dimensions and limits: Bore Diameter (Inner): 25 mm Outside Diameter: 52 mm Overall Width: 15 mm Closure Type: Double shielded ("FF" or "SFF" nomenclature represents two non-contact metal shields) Maximum Speed: 15,000 RPM (Oil) / 12,000 RPM (Grease)Load Capacities: 3,150 lb. radial dynamic / 1,750 lb. radial static Internal Clearance: C3 (standard loose fit for thermal
15/16" ID SPH/OD AG BALL BEARINGS-BCA205TTH>
AG BEARING AKA JOHN DEER AA205DD-GUL205VVH >
15/16"-ID SPH/OD AG BALL BEARINGS-FAF205PPB7>
DOUBLE OPEN FACED BALL BEARINGS-BCA206>
3/4" -ID SPECIAL AG BEARING-GUL206GGH >
DOUBLE OPEN FACE BALL BEARINGS-FAF206K>
SINGLE SHIELDED BALL BEARINGS-FAF206KD>
DOUBLE SHIELDED BALL BEARING WSR-FAF206KDDG>
DOUBLE SHIELDED BALL BEARINGS-FAF206KDD>
Bore Diameter (ID): 30 mm (1.1811 inches) Outside Diameter (OD): 62 mm (2.4409 inches) Width: 16 mm (0.6299 inches) Bearing Type: Radial filling-notch max-capacity ball bearing Bore Type: Straight Application Warning: Due to the filling slot design, this bearing is highly optimized for predominant radial loads and should not be used in pure thrust (axial)
DOUBLE SEALED BALL BEARING-FAF206PP>
DOUBLE SEALED BALL BEARINGS-FAF206PP>
MAX LOAD CAPACITY BALL BEARINGS-FAF206W>
DOUBLE OPEN MAX LOAD BALL BEARINGS-SKF207>
DOUBLE SEALED BALL BEARINGS-FAF207PP>
MAX-TYPE LOAD BALL BEARINGS-FAF207W>
MAXIMUM CAPACITY SHIELDED BEARING-NSK207ZZ >
The MRC 208CFF is a single-row deep groove type ball bearing featuring two metal shields. Manufactured under the MRC brand (by SKF), this specific configuration is equivalent to a standard 6208-2Z or 6208ZZ bearing. Key Specifications Bore Diameter (Inner): 40 mm Outside Diameter: 80 mm Width: 18 mm Closure Type: Double Shielded (indicated by the FF suffix).
208-S-ZZ-C Radial/Deep Groove Ball Bearing - Straight Bore, 40 mm ID, 80 mm OD, 1.1882 in Width, Double Sealed, Without Snap Ring
Cylindrical Bore Deep Groove Ball Bearing
Item #100760654
Deep Groove Bearing
1.57 in Inner Diameter
3.15 in Outer Diameter
1.19 in Width
Bearing Steel Material
208-SFF Wide Single Row Bearing • Bore Diameter (Inner): 40 mm (1.5748 in) • Outside Diameter: 80 mm (3.1496 in) • Overall Width: 18 mm (0.7087 in)
The MRC 208SFF is a heavy-duty, single-row deep groove radial ball bearing manufactured by MRC (a brand under SKF). It features a straight bore and a double-shielded closure ("FF" suffix), making it highly effective at retaining grease while keeping out dust and contaminants. Key Technical Specifications Bore Diameter (Inner ID): 40 mm Outside Diameter (OD): 80 mm Width: 18 mm Enclosure Type: Double Shielded (Metal shields on both sides) Dynamic Load Capacity: 6,900 lb. Static Load Capacity: 4,270 lb. Maximum Speed: 10,000 RPMInterchange Equivalents: Cross-references directly with standard industry part number 6208-2Z (or 6208-ZZ).
Recently Viewed
Dichtomatik N70440 O-Ring, 440 Dash Number, 6.725 in ID x 7.275 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
26-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-26-F1-7/16
26 TOOTH SPROCKETS FOR #60 CHAIN
1/4" X 4" STANDARD TIP ROUND SHANK SCREWDRIVER-ARS66501 >
Porter-Cable® 14446 Offset Profile Mounting Plate, For Use With 9444 Profile Sander Kit
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
.984X1.654" X .315" OIL SEAL-CHI9730 >
