205-SF Single Shielded Radial Ball Bearing
The MRC 205SFF is a single-row deep groove radial ball bearing manufactured by MRC (a brand of SKF). It belongs to the 200-S Light Series (equivalent to a standard 6205 series bearing) and is heavily utilized for applications managing moderate-to-heavy radial loads, two-directional thrust loads, or a combination of both. Technical Specifications According to data sheets from Motion Industries, the bearing features the following standard dimensions and limits: Bore Diameter (Inner): 25 mm Outside Diameter: 52 mm Overall Width: 15 mm Closure Type: Double shielded ("FF" or "SFF" nomenclature represents two non-contact metal shields) Maximum Speed: 15,000 RPM (Oil) / 12,000 RPM (Grease)Load Capacities: 3,150 lb. radial dynamic / 1,750 lb. radial static Internal Clearance: C3 (standard loose fit for thermal
Recently Viewed
The MRC 205SFF is a single-row deep groove radial ball bearing manufactured by MRC (a brand of SKF). It belongs to the 200-S Light Series (equivalent to a standard 6205 series bearing) and is heavily utilized for applications managing moderate-to-heavy radial loads, two-directional thrust loads, or a combination of both. Technical Specifications According to data sheets from Motion Industries, the bearing features the following standard dimensions and limits: Bore Diameter (Inner): 25 mm Outside Diameter: 52 mm Overall Width: 15 mm Closure Type: Double shielded ("FF" or "SFF" nomenclature represents two non-contact metal shields) Maximum Speed: 15,000 RPM (Oil) / 12,000 RPM (Grease)Load Capacities: 3,150 lb. radial dynamic / 1,750 lb. radial static Internal Clearance: C3 (standard loose fit for thermal
1/2" 2000-PSI STEEL/HYD BALL VALVE-NIBT560CSR251/2 >
Midland Industries 80-066 Liquid Filled Pressure Gauge, 0 to 200 psi, 1/4 in Connection, 2-1/2 in Dial, +/- 1.5% Full Scale
Liquid filled gauges enhance the reliability and integrity of the measuring system for long periods. The glycerine filling helps dampen the effects of vibration and pulsation. It also lubricates the movement which extends the life of the gauge. ALL CONNECTIONS ARE BRASS.
MCR Safety 5400S Chem-Tech™ Industrial Grade Chemical-Resistant Gloves, XL, Paired Hand, Blue/Yellow, Flock Lining, 13.39 in L, Resists: Abrasion, Chemical and Oil, Unsupported Support, Gauntlet Cuff, 23 mil THK
Chem-Tech™ Neoprene over Latex Gloves Yellow Flock Lined Latex Dipped in Blue Neoprene 28 mil Thickness 12 Inch Length Component materials comply with all federal regulations for food contact Chem-Tech™ gloves offer the protection you've come to expect from latex gloves and neoprene gloves rolled into one hard-working glove. This glove features a yellow flock-lined latex glove dipped in rugged blue neoprene for double protection. The 5409S is 28 mils thick and measures 12 inches in length. It has a raised diamond grip pattern on the palm, palm side fingers, and thumb, increasing griping power. Other features include a straight cuff and straight thumb. Are you looking for the best flock-lined gloves? Look no further than MCR Safety! This product contains natural rubber latex which may cause allergic reaction to those with latex allergies.
The Super Smart Ball Bushing® bearing family represents a major advancement in linear bearing technology worldwide. These patented and universally self-aligning bearings offer twice the load capacity or eight times the travel life of our industry standard Super Ball Bushing® bearing. To minimize installation time and cost, the Super Smart Ball Bushing® bearing can be ordered factory-installed in an industry standard single or twin pillow block.
WATTS® 0555224 LFB6780M1 2-Piece Diverter Ball Valve, 2 in Nominal, FNPT End Style, Bronze Body, Full Port, PTFE Softgoods
This 2 inch lead free two-piece full port diverter ball valve with threaded end connections is used in commercial and industrial applications designed to divert a full range of liquids and gases. The full port orifice ensures minimal pressure drop, while PTFE seat and chrome plated lead free brass ball provide lasting service. The temperature range is 0 to 350 degrees F (minus 18 to 177 degrees C) at 50 psi (3.5 bar). The maximum working pressure is 400 psi (28 bar) WOG non-shock at 100 degrees F (38 degrees C), 125 psi (8.6 bar) WSP.
