BALL BEARINGS
6004-2-RS-NR Double Sealed Ball Bearing With Snap Ring
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60042RSNR >
6004-2-RS Double Sealed Bearing
6004-2RS SKF Brand Sealed Ball Bearings 20x42x12
6003-ZZ Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 35 mm OD, 10 mm Width, Double Shielded, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN6003ZZ>
6003-2-RS-NR Double Sealed Ball Bearing With Snap RIng
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60032RSNR >
6003-2-RS Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 35 mm OD, 10 mm Width, Double Sealed, Without Snap Ring, C3 Internal Clearance
• Bore Diameter (Inner Ring): 17 mm
• Outside Diameter: 35 mm
• Width: 10 mm
• Enclosure Type: Double Sealed (Contact rubber seals on both sides, abbreviated as 2RS or 2RSH)
• Seal Material: Nitrile Butadiene Rubber (NBR)
• Lubrication: Factory pre-greased for maintenance-free operation
• Max Speed: Typically ranges from 12,000 to 19,000+ RPM under grease lubrication
6002-ZZ high-speed, single-row, deep-groove radial metric ball bearing featuring double metal shields on both sides.
• Bore Diameter (Inner Ring): 15 mm
• Outside Diameter: 32 mm
• Width: 9 mm
• Enclosure Type: Double Shielded (Metal shields on both sides, abbreviated as ZZ or 2Z)
• Lubrication: Factory pre-greased for life
• Max Speed: Approximately 24,000 to 28,000 RPM (depending on application limits)
6002 SNR BEARINGS 15-MM-ID Open Face Ball Bearing
15-MM-ID OPEN-FACE BALL BEARINGS
Recently Viewed
CYLINDRICAL ROLLER BEARING - FAGNJ2305>
The Dominator Series is made tough and roomy for those dirty jobs. It is easily identified by its kelly green color and has additional features that help protect you against splash, grit, and grime. The 3881 is a full coverall with attached hood, is treated to be limited flammability, and is made from a thick .42mm pvc/hi-tensil polyester scrim/pvc material. It features a 30 inch zipper front with snap down double storm flap, has an attached drawstring hood, inner elastic sleeves, and an added 10" x 10" reinforced crotch. Dominate your next job with Dominator series gear.
Dodge® 123870 209 Normal Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 5.5 to 6.19 in L Bolt Center-to-Center, 2.06 in Base to Bore Centerline, 7.44 in OAL x 4.21 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
H-4021X1.3/16 21-t Sprockets For #40 Chain-brwh4021x1.
21-T SPROCKETS FOR #40 CHAIN-BRWH4021X1.3/16>
8-R-B-78 JASON INDUSTRIAL PRODUCTS
8-GROOVE BANDED B-78 V-BELT - JAS8RB78>
4-GRV A OR B-BELT SK-BUSH SHEAVES-BRW4B86SK >
