BALL BEARINGS
THRUST BALL BEARINGS-INAD10>
1/2"-ID THRUST BALL BEARING - INAD1>
SPHERICAL OD BALL BEARING-NTNCS208LLU >
SPHERICAL OD BALL BEARING-NTNCS205LLU >
C-8016 • Bore Diameter (ID): 16 mm (0.6299 in) • Outer Diameter (OD): 35 mm (1.3780 in) • Outer Ring Width: 11 mm (0.4331 in) • Inner Ring Width: 12.192 mm (0.4800 in)
Bore Diameter (Inner): 16 mm (approx. 0.63 inches) Outer Diameter: 35 mm (approx. 1.378 inches) Width: 0.500 inches (1/2 inch) Common Industry Interchanges: You can typically swap or cross-reference this part with an 88016 (double sealed), MRC 488016, or general 8016 entries from manufacturers like NTN or National.
The Schatz BR9902 (often requested with typos like zbr9902) is a high-precision, single-row deep groove radial ball bearing. Manufactured in the USA by the Schatz Bearing Corporation, it features an inch-based dimension profile and is widely used across aerospace, instrumentation, and small mechanical assemblies.
• Shaft Diameter (Bore ID): 1-3/16 inches (1.1875")
• Housing Base Configuration: 2-Bolt Pillow Block
• Housing Material: High-tensile Pressed Steel with Rubber Ring Insert
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Lubrication Status: Factory pre-greased and lubricated for life (Non-Relubricatable)
• Stamping Load Limit: 800 lbs
• Total Weight: 1.35 lbs
BPR-6-18 a normal-duty, light-weight pillow block ball bearing assembly configured for a 1-1/8 inch shaft.
• Shaft Diameter (Bore ID): 1-1/8 inches (1.1250")
• Housing Base Configuration: 2-Bolt Pillow Block
• Housing Material: High-tensile Pressed Steel with a Rubber Cushion Ring
• Locking Mechanism: Dual 120° Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Radial Dynamic Load Capacity: 4,410 lbf
• Radial Static Load Capacity: 2,540 lbf
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
• Total Weight: ~1.23 lbs
• Bore Diameter (Shaft Size): 3/4 inch (0.7500 in)
• Note: In imperial bearing nomenclature, the "-12" suffix designates the bore diameter in sixteenths of an inch (12/16" = 3/4").
• Housing Type: Pressed Steel Pillow Block with a Rubber Cushioning Ring
• Locking Mechanism: Set Screw Locking
• Replacement Insert Part Number: B4-12 (Narrow Inner Ring, Cylindrical O.D.)
• Housing Part Number: PP5
• Rubber Ring Part Number: R5
• Stamping Load Limit: 400 lbs
• Dynamic Load Rating: 2,890 lbf
• Static Load Rating: 1,500 lbf
BPFT-7-23 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-7/16 inch shaft.
• Shaft Diameter (Bore ID): 1-7/16 inches (1.4375")
• Housing Profile: 3-Bolt Round / Triangular Flange
• Housing Material: High-tensile Pressed Steel
• Locking Mechanism: Dual Set-Screw Collar
• Stamping Load Limit: 1,400 lbs
• Radial Dynamic Load Capacity: ~5,820 lbf (2,640 kgf)
• Radial Static Load Capacity: ~3,460 lbf (1,570 kgf)
• Lubrication Status: Factory pre-greased and sealed (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
BPFT-6-19 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-3/16 inch shaft.
• Shaft Diameter (Bore ID): 1-3/16 inches (1.1875")
• Housing Type: 3-Bolt Round / Triangular Flange
• Housing Material: High-tensile Pressed Steel (PFT6 frame)
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel (B6-19 insert)
• Radial Dynamic Load Capacity: 4,410 lbf (2,000 kgf)
• Radial Static Load Capacity: 2,535 lbf (1,150 kgf)
• Stamping Load Limit: 1,100 lbs
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
BPFT-6-18 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-1/8 inch shaft.
• Shaft Diameter (Bore ID): 1-1/8 inches (1.1250")
• Housing Profile: 3-Bolt Triangular Flange
• Housing Material: High-tensile Pressed Steel (PFT6 frame size)
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Radial Dynamic Load Capacity: 4,410 lbf
• Radial Static Load Capacity: 2,540 lbf
• Stamping Structural Load Limit: 1,100 lbs
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
• Max Temperature Threshold: Up to 212°F (100°C) duty rating
• Bore Diameter (Shaft Size): 1-3/16 inches (1.1875 in)
• Housing Type: 2-Bolt Flange (Pressed Steel)
• Locking Mechanism: Set Screw
• Bolt Hole-to-Hole Distance: 3-9/16 inches (90.5 mm)
• Overall Housing Height/Width: 3-19/64 inches (84 mm)
• Bearing Insert Material: Chrome Steel / Roller Bearing Steel
AI Mode Conversation: GENERAL BEARING BPFL619
GENERAL BEARING BPFL619
The General Bearing BPFL619 (often stylized as BPFL 6-19) is a light-duty, pressed-steel 2-bolt flange ball bearing unit. This assembly features a set-screw locking mechanism and is commonly used in light industrial, agricultural, or conveyor applications where a lightweight, low-profile flanged mount is required.
Technical Specifications
• Bore Diameter (Shaft Size): 1-3/16 inches (1.1875 in)
• Housing Type: 2-Bolt Flange (Pressed Steel)
• Locking Mechanism: Set Screw
• Bolt Hole-to-Hole Distance: 3-9/16 inches (90.5 mm)
• Overall Housing Height/Width: 3-19/64 inches (84 mm)
• Bearing Insert Material: Chrome Steel / Roller Bearing Steel
Industry Interchanges & Part Numbers
If you are looking for drop-in replacements or cross-referencing catalogs from other major manufacturers, this unit matches the following industry part numbers:
• Asahi: BPFL 6-19 / KHPFL 206-19
• AMI Bearings: SBPFL206-19
• Peer / IPTCI: ASPFL 206-103
Are you looking to purchase a direct replacement, or do you need help verifying the load ratings and lubrication requirements for your specific machine setup?
Let's confirm it's in stock nearby
I'll check with nearby stores to make sure the item you need is available before you go
Check for me
Learn more
•
Maedler North America
Ball flange bearing BPFL 203 bore 17mm two-part steel sheet, zinc-plated PN: 62651700 – Maedler North America
Material: Two-part zinc-plated steel sheet housing, roller bearing steel. Base price $16.44 (quantity 1-4), scaling down to $12.41...
•
Scribd
Asahi 02 | PDF | Bearing (Mechanical) | Steel - Scribd
Flange 2-Bolt, Cast Iron. Steel, Wide Inner Ring, Spherical, BPFL 6-19 KHPFL 206-19 B6-19
•
ISB Industries
Self-aligning unit bearing support - ISB Industries
agricultural machinery; * gardening machinery; * fitness machines; * wood working machinery; * marble working machinery; * bottlin...
Show a
• Bore Diameter (Shaft Size): 1-3/16 inches (or 30 mm variant depending on application specs)
• Housing Type: 2-Bolt Pillow Block (Light-Duty Base Mount)
• Locking Mechanism: Eccentric Locking Collar or Set Screw (varies by sub-manufacturer configuration)
• Bolt Hole Center-to-Center (J): 120 mm (4.724 in)
• Centerline Height (H): 42.9 mm (1.689 in)
• Overall Length (L/H2): 83 mm
MAXLOAD BALL BEARING-NTNBL311 >
DOUBLE OPEN FACED BALL BEARINGS-NSKBL218C3>
MAXLOAD BALL BEARING-NTNBL212 >
MAX LOAD TWO SHIELD BALL BEARINGS-NTNBL211ZZ>
MAX LOAD TWO SHIELD BALL BEARING - NTNBL207ZZ>
BK-1 CHICAGO RAWHIDE a classic front wheel spindle bearing and seal kit (also cataloged as a front locking hub service kit) designed for domestic 4WD trucks and SUVs.
BEARINGS-BEARINGS-CHIBK1>
7/16"-HEX BORE BALL BEARINGS-SCZAFH2856>
7/16" -HEX BORE BALL BEARING-GULAFH2856 >
These unground flanged ball bearings have very low precision tolerance levels. The are suitable for applications that do not require high precision movement
Recently Viewed
2-GRV VARIABLE PITCH SHEAVES -IDC2VP0621 >
GEARWRENCH offers a wide range of pry bars for almost every application. The aligning and rolling head pry bars are manufactured from high alloy steel for superior strength and durability. They are ideal for prying, positioning, aligning, and lifting applications. Use the tapered end for aligning applications. The curved blade of the aligning pry bars provides extra leverage, while the rolling head provides maximum leverage. Available in sets and individually, these pry bars can handle just about any prying or aligning application.
Browning 22-TOOTH #60-1 CHAIN SPROCKETS BRW H-6022 X 1-1/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
" F" -STYLE BUSHING 1-1-1/16" -ID-BRWF111/16 >
3/8"-16 NC USS PLUG TAP - JWH304584 >
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
