BALL BEARINGS
D-10 INA BEARING inch-series, single-direction banded ball thrust bearing
• Bore Diameter (ID): 1-1/16 inches / 1.0625 in (26.988 mm)
• Outside Diameter (OD): 1-31/32 inches / 1.9688 in (50.013 mm)
• Overall Thickness / Height: 5/8 inch / 0.6250 in (15.875 mm)
• Dynamic Axial Load Capacity (C): 6,700 lbf (29,800 N)
• Static Axial Load Capacity (C₀): 13,100 lbf (58,000 N)
C-8016 • Bore Diameter (ID): 16 mm (0.6299 in) • Outer Diameter (OD): 35 mm (1.3780 in) • Outer Ring Width: 11 mm (0.4331 in) • Inner Ring Width: 12.192 mm (0.4800 in)
Bore Diameter (Inner): 16 mm (approx. 0.63 inches) Outer Diameter: 35 mm (approx. 1.378 inches) Width: 0.500 inches (1/2 inch) Common Industry Interchanges: You can typically swap or cross-reference this part with an 88016 (double sealed), MRC 488016, or general 8016 entries from manufacturers like NTN or National.
BR-9902 Double Shielded Mini Ball Bearing
The Schatz BR9902 (often requested with typos like zbr9902) is a high-precision, single-row deep groove radial ball bearing. Manufactured in the USA by the Schatz Bearing Corporation, it features an inch-based dimension profile and is widely used across aerospace, instrumentation, and small mechanical assemblies.
BPR-6-19 • Shaft Diameter (Bore ID): 1-7/16 inches (1.4375") • Housing Profile: 3-Bolt Round / Triangular Flange • Housing Material: High-tensile Pressed Steel • Locking Mechanism: Dual Set-Screw Collar • Stamping Load Limit: 1,400 lbs • Radial Dynamic Lo
• Shaft Diameter (Bore ID): 1-3/16 inches (1.1875")
• Housing Base Configuration: 2-Bolt Pillow Block
• Housing Material: High-tensile Pressed Steel with Rubber Ring Insert
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Lubrication Status: Factory pre-greased and lubricated for life (Non-Relubricatable)
• Stamping Load Limit: 800 lbs
• Total Weight: 1.35 lbs
BPR-6-18 a normal-duty, light-weight pillow block ball bearing assembly configured for a 1-1/8 inch shaft.
• Shaft Diameter (Bore ID): 1-1/8 inches (1.1250")
• Housing Base Configuration: 2-Bolt Pillow Block
• Housing Material: High-tensile Pressed Steel with a Rubber Cushion Ring
• Locking Mechanism: Dual 120° Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Radial Dynamic Load Capacity: 4,410 lbf
• Radial Static Load Capacity: 2,540 lbf
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
• Total Weight: ~1.23 lbs
BPR-4-12 a light-duty, rubber-cushioned pressed steel pillow block bearing unit. This specialized unit consists of a narrow inner ring bearing insert housed within a compact, two-piece pressed steel housing, wrapped with a rubber cushioning ring to absorb
• Bore Diameter (Shaft Size): 3/4 inch (0.7500 in)
• Note: In imperial bearing nomenclature, the "-12" suffix designates the bore diameter in sixteenths of an inch (12/16" = 3/4").
• Housing Type: Pressed Steel Pillow Block with a Rubber Cushioning Ring
• Locking Mechanism: Set Screw Locking
• Replacement Insert Part Number: B4-12 (Narrow Inner Ring, Cylindrical O.D.)
• Housing Part Number: PP5
• Rubber Ring Part Number: R5
• Stamping Load Limit: 400 lbs
• Dynamic Load Rating: 2,890 lbf
• Static Load Rating: 1,500 lbf
BPFT-7-23 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-7/16 inch shaft.
• Shaft Diameter (Bore ID): 1-7/16 inches (1.4375")
• Housing Profile: 3-Bolt Round / Triangular Flange
• Housing Material: High-tensile Pressed Steel
• Locking Mechanism: Dual Set-Screw Collar
• Stamping Load Limit: 1,400 lbs
• Radial Dynamic Load Capacity: ~5,820 lbf (2,640 kgf)
• Radial Static Load Capacity: ~3,460 lbf (1,570 kgf)
• Lubrication Status: Factory pre-greased and sealed (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
BPFT-6-19 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-3/16 inch shaft.
• Shaft Diameter (Bore ID): 1-3/16 inches (1.1875")
• Housing Type: 3-Bolt Round / Triangular Flange
• Housing Material: High-tensile Pressed Steel (PFT6 frame)
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel (B6-19 insert)
• Radial Dynamic Load Capacity: 4,410 lbf (2,000 kgf)
• Radial Static Load Capacity: 2,535 lbf (1,150 kgf)
• Stamping Load Limit: 1,100 lbs
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
BPFT-6-18 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-1/8 inch shaft.
• Shaft Diameter (Bore ID): 1-1/8 inches (1.1250")
• Housing Profile: 3-Bolt Triangular Flange
• Housing Material: High-tensile Pressed Steel (PFT6 frame size)
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Radial Dynamic Load Capacity: 4,410 lbf
• Radial Static Load Capacity: 2,540 lbf
• Stamping Structural Load Limit: 1,100 lbs
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
• Max Temperature Threshold: Up to 212°F (100°C) duty rating
BPFL-6-19 a light-duty, pressed-steel 2-bolt flange ball bearing unit. This assembly features a set-screw locking mechanism and is commonly used in light industrial, agricultural, or conveyor applications where a lightweight, low-profile flanged mount is
• Bore Diameter (Shaft Size): 1-3/16 inches (1.1875 in)
• Housing Type: 2-Bolt Flange (Pressed Steel)
• Locking Mechanism: Set Screw
• Bolt Hole-to-Hole Distance: 3-9/16 inches (90.5 mm)
• Overall Housing Height/Width: 3-19/64 inches (84 mm)
• Bearing Insert Material: Chrome Steel / Roller Bearing Steel
BPFL-1-8 a light-duty, narrow inner ring 2-bolt pressed steel flange ball bearing unit with a set-screw locking configuration. In standard imperial industrial nomenclature, the "1-8" suffix directly represents the bore diameter measured in sixteenths of a
AI Mode Conversation: GENERAL BEARING BPFL619
GENERAL BEARING BPFL619
The General Bearing BPFL619 (often stylized as BPFL 6-19) is a light-duty, pressed-steel 2-bolt flange ball bearing unit. This assembly features a set-screw locking mechanism and is commonly used in light industrial, agricultural, or conveyor applications where a lightweight, low-profile flanged mount is required.
Technical Specifications
• Bore Diameter (Shaft Size): 1-3/16 inches (1.1875 in)
• Housing Type: 2-Bolt Flange (Pressed Steel)
• Locking Mechanism: Set Screw
• Bolt Hole-to-Hole Distance: 3-9/16 inches (90.5 mm)
• Overall Housing Height/Width: 3-19/64 inches (84 mm)
• Bearing Insert Material: Chrome Steel / Roller Bearing Steel
Industry Interchanges & Part Numbers
If you are looking for drop-in replacements or cross-referencing catalogs from other major manufacturers, this unit matches the following industry part numbers:
• Asahi: BPFL 6-19 / KHPFL 206-19
• AMI Bearings: SBPFL206-19
• Peer / IPTCI: ASPFL 206-103
Are you looking to purchase a direct replacement, or do you need help verifying the load ratings and lubrication requirements for your specific machine setup?
Let's confirm it's in stock nearby
I'll check with nearby stores to make sure the item you need is available before you go
Check for me
Learn more
•
Maedler North America
Ball flange bearing BPFL 203 bore 17mm two-part steel sheet, zinc-plated PN: 62651700 – Maedler North America
Material: Two-part zinc-plated steel sheet housing, roller bearing steel. Base price $16.44 (quantity 1-4), scaling down to $12.41...
•
Scribd
Asahi 02 | PDF | Bearing (Mechanical) | Steel - Scribd
Flange 2-Bolt, Cast Iron. Steel, Wide Inner Ring, Spherical, BPFL 6-19 KHPFL 206-19 B6-19
•
ISB Industries
Self-aligning unit bearing support - ISB Industries
agricultural machinery; * gardening machinery; * fitness machines; * wood working machinery; * marble working machinery; * bottlin...
Show a
BLLP-6-19-J light-duty, self-aligning 2-bolt pillow block bearing unit. Unlike standard cast-iron pillow blocks, the BLLP series features a compact, low-profile design. The "J" suffix signifies a standardized metric mounting or housing configuration com
• Bore Diameter (Shaft Size): 1-3/16 inches (or 30 mm variant depending on application specs)
• Housing Type: 2-Bolt Pillow Block (Light-Duty Base Mount)
• Locking Mechanism: Eccentric Locking Collar or Set Screw (varies by sub-manufacturer configuration)
• Bolt Hole Center-to-Center (J): 120 mm (4.724 in)
• Centerline Height (H): 42.9 mm (1.689 in)
• Overall Length (L/H2): 83 mm
BL-207-ZZ Max Load Two Shield Ball Bearing
MAX LOAD TWO SHIELD BALL BEARING - NTNBL207ZZ>
BK-1 CHICAGO RAWHIDE a classic front wheel spindle bearing and seal kit (also cataloged as a front locking hub service kit) designed for domestic 4WD trucks and SUVs.
BEARINGS-BEARINGS-CHIBK1>
AF-6464 1" X 2" Unground Flanged Radial Ball Bearing
These unground flanged ball bearings have very low precision tolerance levels. The are suitable for applications that do not require high precision movement
Recently Viewed
2-3/16" -ID PILLOW BLOCK UNIT-FAFRAS23/16 >
HYDRAULIC FITTING HY-0810-RA >108285-DAY10OR8SB >
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
V-BELTOUTSIDE CIRCUMFERENCE 27."-JAS2230V270 >
FLATWASHER-PDTSG5042603 >
Proto® JT3004R Screwdriver, T30 Star/Torx® Point, Alloy Steel Shank, 8-1/2 in OAL, Black Oxide/Polished Chrome, ASME B107.15
