6214-2-RS Double Sealed Ball Bearing
DOUBLE SEALED BALL BEARING-GUL62142RS >
Recently Viewed
DOUBLE SEALED BALL BEARING-GUL62142RS >
Weiler® 01475 Narrow Face Non-Sparking Wheel Brush, 6 in Dia Brush, 1/2 in W Face, 0.0118 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 5/8 in Arbor Hole
Weiler® 6 in narrow face crimped wire Wheel Brush provides a flexible brushing action and consistent performance for demanding light duty cleaning and deburring applications. Featuring Weiler® solid ring construction, these radial brushes are available in heat treated steel, type 302 stainless steel and brass wire for use in a wide variety of applications. 5/8 to 1/2 in arbor hole for use on bench/pedestal grinder, CNC/milling/automatic machines and straight grinders.
Weiler® 17609 Conflex Wheel Brush, 2 in Dia Brush, 3/8 in W Face, 0.006 in Dia Crimped Filament/Wire
Weiler® 17609 Conflex Wheel Brush, 2 in Dia Brush, 3/8 in W Face, 0.006 in Dia Crimped Filament/Wire
OIL SEALS-NAT16680>
Square Dâ„¢ QOâ„¢ QO120M150PRB 1-Phase Convertible Main Neutral Load Center, 120/240 V AC, 150 A, 1 Pole, 22 kA Interrupt
QO Load Centers offer premium features by allowing QO breakers, ground fault interrupters, arc fault interrupters, and surge arresters to be installed inside. QO Load Centers are designed for residential and industrial use to protect electrical systems, equipment, and people. They are available in both traditional and plug on neutral configurations. There is 3 types of mains available. There is main circuit breaker, main lugs, and generator panel. Single and three phase options are available. The bus bars are tin plated copper and are shielded. Indoor and outdoors enclosures are an option. QO Load Centers enable the use of a full complement of accessories. This 1 phase load center has 20 spaces and 30 circuits. This system provides a 150A convertible main breaker in a NEMA 3R enclosure. It also includes plug on neutral and is UL rated.
Schneider Electric Square Dâ„¢ TeSysâ„¢ GV2 GV2ME06 Non-Reversing Manual Motor Starter With Thermal Magnetic Circuit Protector, 3 Poles, IP20 Enclosure
The GV2 manual starter and protector provides manual isolation, manual motor control, and thermal overcurrent protection in one compact unit. The basic motor starter GV2ME controls motors with full load currents up to 32 A. The manual starter is three pole with horsepower ratings. The manual starter is operated by push buttons. The Class 10 ambient compensated thermal over current is adjustable from 1 ampere to 1.6 ampere. This device has screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX).
