5208-M Double Row Open Ball Bearing
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #100760658
Unmounted, Angular Contact Bearing
1.57 in Inner Diameter
3.15 in Outer Diameter
1.19 in Width
Bearing Steel Material
Recently Viewed
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #100760658
Unmounted, Angular Contact Bearing
1.57 in Inner Diameter
3.15 in Outer Diameter
1.19 in Width
Bearing Steel Material
THRUST BALL BEARING -NTN51201 >
Koyo IR-2424 Inch Series Regular Width Inner Ring, 1-1/2 in ID x 1-3/4 in OD, 1.515 in OAW, For Use With Inch Series Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
Sealmaster® 550098 RCI Mounted Tapered Roller Insert Only, 1.438 in Dia Bore, 2-7/8 in OD, 3 in W, 4760 lb Load
MORSE® 59878 5970 Premium Open Coated Disc Roll, End Cut End, Cylindrical Head, 3/16 in Dia Head, 5/8 in L of Cut, 2 in OAL, Double Cut
MORSE® 59878 5970 Premium Open Coated Disc Roll, End Cut End, Cylindrical Head, 3/16 in Dia Head, 5/8 in L of Cut, 2 in OAL, Double Cut
Crescent® 58002 Hex Key, L-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
Crescent® 58002 Hex Key, L-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
