Ingersoll-Rand 295A 295A General Duty Impact Wrench, 1 in Drive, 2000 N-m Torque, 11 to 45 cfm Air Flow, 10-1/2 in OAL
The 295A Series Impact Wrench combines exceptional power, control and durability is great for any garage. They deliver 1,770 ft-lb of maximum torque @ 120 psi, with 5,250 rpm free speed and a high-efficiency, 6-vane motor. The top-mounted dead handle provides great leverage for difficult underbody work.
-
BrandIngersoll Rand
-
UPC066302302029
-
Manufacturer Part Number295A
-
CountryUSA
-
Tool/KitBare Tool
-
Torque Rating2000 N-m
-
Minimum Hose Size1/2 in
-
TypeGeneral Duty
-
Handle TypePistol Grip
-
Air Flow Rate11 to 45 cfm
-
Air Inlet1/2 in NPT
-
Air Pressure90 psi
-
Series295A
-
Housing MaterialAluminum
-
Sound Level101.1 dBA Pressure/112.1 dBA Power
-
Speed5000 rpm
-
Blows per Minute1000 bpm
-
Drive Size1 in
-
Drive TypeHog Ring/Square/Through Hole
-
Overall Length10-1/2 in
- Power, The rocking dog's combination of high inertia and low BPM means this tool can deliver a powerful blow with little air, giving you all the power you want without having to overextend yourself
- Reliability, Built with a steel hammer case and metal housing, this wrench can withstand repeated drops and harsh weather conditions
- Durable and Resistant, Phenolic 6 vane motor resist harsh environments for less downtime on the job
- Control, Features top mounted dead handle, Feather Touch trigger and 3 position power regulator in both forward and reverse
- Speed, The impact wrench has a free speed of 5,250 rpm
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 5LA60 |
| Fastenal | 0254843 |
| Ferguson | I295A |
-
UNSPSC27131501
-
Specification Sheet
-
Instruction/Installation Manual
-
Full Engineering Drawing
-
Line Drawing
-
Technical Bulletin
Recently Viewed
Ingersoll-Rand 295A 295A General Duty Impact Wrench, 1 in Drive, 2000 N-m Torque, 11 to 45 cfm Air Flow, 10-1/2 in OAL
The 295A Series Impact Wrench combines exceptional power, control and durability is great for any garage. They deliver 1,770 ft-lb of maximum torque @ 120 psi, with 5,250 rpm free speed and a high-efficiency, 6-vane motor. The top-mounted dead handle provides great leverage for difficult underbody work.
4" CUP WHEEL GUARD ASSEMBLYS-MWK49120062>
Ingersoll-Rand 7802RA General Duty Reversible Air Drill, 3/8 in Keyed/Standard Chuck, 1/2 hp, 4 cfm Average/26 cfm at Load Air Flow, 90 psi, 7.4 in OAL
Ingersoll-Rand 7802RA General Duty Reversible Air Drill, 3/8 in Keyed/Standard Chuck, 1/2 hp, 4 cfm Average/26 cfm at Load Air Flow, 90 psi, 7.4 in OAL
Browning® 764089 SPS-S200 Normal Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4-5/8 to 5-3/8 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL x 3-45/64 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
DeWALT® Screw-Bolt™ PFM1411060 1-Piece Heavy Duty High Performance Screw Anchor, 1/4 in Dia, 2-1/4 in OAL, Hex Washer Head Drive, Carbon Steel, 1 in D Min Embedment
The Screw-Bolt™ anchor is a 1-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt™ is available as bright zinc plated or mechanically galvanized plating. Suitable base materials include normal weight concrete.
Browning® 764086 SPS-S200 Normal Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4-7/16 to 5-3/32 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 6-1/2 in OAL x 3-17/64 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
