2141 INGERSOLL RAND TOOLS
3/4"-DR 1350-FT/LB AIR IMPACT WRENCH - ING2141>
Recently Viewed
3/4"-DR 1350-FT/LB AIR IMPACT WRENCH - ING2141>
DeWALT® Power-Stud® 7315 Wedge Expansion Anchor, 3/8 in Dia, 3-3/4 in OAL, 2-5/8 in L Thread, 304 Stainless Steel, Galvanized
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
Chicago Pneumatic 6151952105 Die Grinder, 1/4 in Collet, 0.32 hp, 4.3 to 8.692 cfm Air Flow, 28000 rpm Speed
The CP876 series is designed for general maintenance in limited spaces applications. It has an integrated pneumatic regulator with a power of 0.3 HP (220 W). It is a very compact and lightweight tool, ensuring extreme maneuverability in high-speed grinding applications.
Ingersoll-Rand 2115TIMAX Impact Wrench, 3/8 in Drive, 339 Nm Forward, 407 Nm Reverse Torque Rating, 17 cfm Full Load/4 cfm Average Air Flow, 5.95 in OAL
The 2115TiMAX delivers best in class performance for a tool less than six inches long and weighing less than two and a half pounds. The minimal size of this tool will allow greater access to tight spaces, while the minimal weight will reduce operator fatigue...all while still delivering MAX performance.
Westinghouse 0406700 Dimmable Specialty Incandescent Lamp, 7.5 W, E26 Incandescent Lamp, S11 Shape
Incandescent lamps represent the original lighting technology, remaining virtually unchanged since their invention in the mid-19th century, and the lighting technology Satco was founded upon. This is the technology most everyone has become familiar with and the baseline comparison for all other lighting technologies. As the incandescent bulb becomes more and more regulated, Satco remains on the cutting edge of new lighting technologies. Still, we remain well-stocked with incandescent lamps in a multitude of wattages, base sizes, and shapes for every application.
DeWALT® Power-Stud® 7323 Wedge Expansion Anchor, 1/2 in Dia, 4-1/2 in OAL, 3-1/8 in L Thread, 304 Stainless Steel, Galvanized
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
