Ingersoll Rand 211 Air Impact Wrench, 3/8 in Drive, 150 ft-lb Torque Rating, 11 cfm Full Load/2.5 cfm Average Air Flow, 6.6 in OAL
The 211 Straight Impact Wrench is extremely efficient. Tested just for you, this wrench doesn’t stall and you can rely on it from beginning to end.
-
BrandIngersoll Rand
-
UPC663023000800
-
Manufacturer Part Number211
-
CountryUSA
-
Minimum Hose Size3/8 in
-
Handle TypeStraight
-
Air Flow Rate11 cfm Full Load/2.5 cfm Average
-
Dimensions3.6 in H x 2 in W
-
Blows per Minute1500 bpm
-
Drive Size3/8 in
-
Drive TypeHog Ring/Square
-
Tool/KitBare Tool
-
Torque Rating150 ft-lb
-
Series211
-
Speed1000 rpm
-
Overall Length6.6 in
- Power, The ball and cam mechanism delivers a high output of power
- Coupled with its vane motor and power regulator, you'll be speeding through your work in no time
- Durability, This impact wrench's steel hammer case provides you with increased durability for heavy-duty projects
- No matter how hard you work, this wrench can handle it
- Durability, This impact wrench's steel hammer case provides you with increased durability for heavy-duty projects
- No matter how hard you work, this wrench can handle it
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 1591-211 |
-
Warranty1 Year
-
UNSPSC27131501
-
Instruction/Installation Manual
-
Owners/User Manual
-
Line Drawing
Recently Viewed
Ingersoll Rand 211 Air Impact Wrench, 3/8 in Drive, 150 ft-lb Torque Rating, 11 cfm Full Load/2.5 cfm Average Air Flow, 6.6 in OAL
The 211 Straight Impact Wrench is extremely efficient. Tested just for you, this wrench doesn’t stall and you can rely on it from beginning to end.
Milwaukee® 49-05-0041 Non-Threaded Back Flange, For Use With 4-1/2 in and 5 in Angle Grinders, 7/8 in Arbor, 1.69 in OD, 0.34 in THK
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Universal sealant. Lubricates and seals threaded joints on water, oil and fuel lines. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids.
Starrett® 178MA Fillet/Radius Gage With Locking Device, 1 to 3 mm, 34 Leaves, Stainless Steel
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 34 Leaves, 1-7mm Range, 0.25mm/0.5mm increments.
FREUDENBERG Simmering® 75013157 B1 Single Lip Oil Seal, 90 mm ID x 120 mm OD, 13 mm W, NBR Lip, 72 Durometer
FREUDENBERG Simmering® 333942TC-BX B1 Single Lip Oil Seal, 90 mm ID x 120 mm OD, 13 mm W, NBR Lip, 72 Durometer
WATTS® 0780320 Heavy Duty Float Valve Stem, 5/16 in NPT, Brass
This 5/16 IN OD, 12 inch heavy duty brass threaded stem is designed for use with float valve to control high capacity water flow in commercial, industrial and agricultural applications. It is made of heavy duty brass with 5/16-18 inch NPT threaded ends for valve and float.
