AIR/PNEUMATIC FLUX CHIPPING HAMMER JETF25
The JAT-820 ball lock flux chipper was made for those who change chisels on a regular basis. The ball detent lock makes switching chisels fast and easy while giving you all the power you need to get the job done.
-
BrandJET®
-
UPC731325354454
-
Manufacturer Part NumberJT9-505820
-
CountryUSA
-
Tool/KitBare Tool
-
Minimum Hose Size3/8 in ID
-
Retainer StyleBall Lock
-
Air Flow Rate4 cfm
-
Air Inlet1/4 in NPT
-
Air Pressure90 psi
-
SeriesR8 Series
-
Sound Level90 dB Pressure/102 dB Power
-
Blows per Minute4000 bpm
-
Stroke Length7/8 in
-
Overall Length13-1/8 in
- High-quality tools designed for daily, 8 hour use in demanding applications and environments, the R8 series are engineered with additional features for improved power, safety and comfort
- Heavy duty, heat treated barrels and pistons for reliability and durability
- Ball lock retainer permits quick tool change
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2118956 |
-
Alternative Part Number505820
-
UNSPSC27131500
-
Includes
-
WarrantyLifetime
Recently Viewed
The JAT-820 ball lock flux chipper was made for those who change chisels on a regular basis. The ball detent lock makes switching chisels fast and easy while giving you all the power you need to get the job done.
Channellock® 415 Tongue and Groove Plier, 2 in Nominal, 1.38 in L Nickel Smooth Jaw, Smooth Jaw Surface, 10 in OAL
All the versatility and strength of a Straight Jaw Plier, but with a smooth jaw design to protect surfaces from scratching (PVC pipe, chromes etc.). This plier is built to last with a PermaLock® fastener to eliminate nut and bolt failure and a patented reinforcing edge to minimize stress breakage.
Browning® 767384 VPLE 200 Normal Duty Pillow Block Ball Bearing, 1-7/16 in Dia Bore, 4-5/8 to 5-3/8 in L Bolt Center-to-Center, 1-13/16 in Base to Bore Centerline, 6-3/4 in OAL x 3-5/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767440 VTBS 200 Normal Duty Pillow Block Ball Bearing, 1 in Dia Bore, 2 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 3 in OAL x 2-13/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767936 VTBS 200 Normal Duty Pillow Block Ball Bearing, 1-15/16 in Dia Bore, 4 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 5-1/2 in OAL x 4-5/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 1064484 Multiple Sheave, 1/2 to 1-1/4 in QD® Bore, 3.15 in OD, 2 Grooves, 3.1 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
