Polyethylene Tubing
1/4" -OD POLYETHYLENE TUBING IS FLEXIBLE AND CRACK RESISTANT. OPERATING TEMPERATURES IS 150 DEGREES F TO -76 DEGREES F. SOLD IN 100 FOOT ROLL.-JWH426872 >
3/8" -OD POLYETHYLENE TUBING IS FLEXIBLE AND CRACK RESISTANT. OPERATING TEMPERATURES IS 150 DEGREES F TO -76 DEGREES F. SOLD IN 100 FOOT ROLL.-JWH426881 >
3/8" -OD POLYETHYLENE TUBING IS FLEXIBLE AND CRACK RESISTANT. OPERATING TEMPERATURES IS 150 DEGREES F TO -76 DEGREES F. SOLD BY THE FOOT-JWH426881FT >
3/16" ID 5/16"OD POLY TUBE--ROLL OF 300'-JWH453609>
3/8"-ID X 60" POLYBUTYLENE TUBE-JWH490008
1/2"-ID X 5' POLYBUTYLENE TUBE-JWH490016>
3/4"-ID X 5' POLYBUTYLENE TUBE-JWH490024>
1/4"-OD X .170"-ID POLYETHYLENE TUBE/TUBING MAXIMUM WORKING PRESSURE AT 75-DEGREES FARENHEIT: 173-PSI WALL THICKNESS: .040" COLOR: NATURAL
COILHOSE PNEUMATICS PRODUCTS PE-0417-100-R 1/4" -OD Red Poly Tube - RL/100'
PE0417-100R by Coilhose | Tubing | 1/4" OD x .170" ID | .040" Wall thickness | Red | Polyethylene | 100ft
COILHOSE PNEUMATICS PRODUCTS PE-0417-100-Y 1/4" -OD Yellow Poly Tube -RL/100'
PE0417-100Y by Coilhose | Tubing | 1/4" OD x .170" ID | .040" Wall thickness | Yellow | Polyethylene | 100ft
1/4"-OD X .170"-ID BLACK POLYETHYLENE TUBE/TUBING MAXIMUM WORKING PRESSURE AT 75-DEGREES FARENHEIT: 173-PSI WALL THICKNESS: .040" COLOR: BLACK
COILHOSE PNEUMATICS PRODUCTS PE-0465-100 2.7-MM X 4-MM Poly Tube - RL/100'
2.7-MM-ID X 4-MM-OD | POLYETHYLENE TUBING | WALL THICKNESS .65-MM | COLOR: NATURAL WP AT 75-DEGREES-F | TEMPERATURE RANGE | -40-DEGREES-F TO +150-DEGREES-F
COILHOSE PNEUMATICS PRODUCTS PE-1215-100 12-MM -OD X 9-MM Poly Tube - RL/100'
PE1215-100 by Coilhose | Tubing | 12mm OD x 9mm ID | 1.0 mm Wall thickness | Polyethylene | 100ft
PE3103 by Coilhose | Tubing | 5/16" OD x .236" ID | .038" Wall thickness | Natural | Polyethylene
Coilhose® PE0417-500G Tubing, 0.17 in ID x 1/4 in OD x 500 ft L x 0.4 in THK Wall, Polyethylene
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our PE Tubing is manufactured from high quality resins and extruded to close tolerances. We offer five popular sizes. Compatible with Coilock Fittings and Poly-Tube Fittings.
Coilhose® PE0610-100K Tubing, 4 mm ID x 6 mm OD x 100 ft L x 1 mm THK Wall, Polyethylene
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our PE Tubing is manufactured from high quality resins and extruded to close tolerances. We offer five popular sizes. Compatible with Coilock Fittings and Poly-Tube Fittings.
Coilhose® PE0810-100K Tubing, 6 mm ID x 8 mm OD x 100 ft L, 1 mm THK Wall, Extrusion, Polyethylene, Domestic
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our polyethylene tubing is extruded from high-quality resin. Compatible with Coilockâ„¢ push-to-connect fittings.
Coilhose® PE1010-100K Tubing, 8 mm ID x 10 mm OD x 100 ft L, 1 mm THK Wall, Extrusion, Polyethylene, Domestic
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our polyethylene tubing is extruded from high-quality resin. Compatible with Coilockâ„¢ push-to-connect fittings.
Outside Diameter (OD): 5/32" Inside Diameter (ID): 0.106"Working Pressure: 175 psi at room temperature Material: High-quality extruded polyethylene resin Fitting Compatibility: Works seamlessly with Coilock push-to-connect and standard poly-tube compression fittings.
Recently Viewed
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3303A>
Milwaukee® 48-20-5150 Heavy Duty Thick Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
TAPER-BORE SPHERICAL BEARINGS-NSK22207K>
80,000-BTU KEROSENE TORPEDO HEATER-DYGRMCKFA80DGD>
DOUBLE SHIELDED MINI BALL BEARING-GEN77R14>
BALL BEARINGS-ORS622042RS>
