COILHOSE PNEUMATICS PRODUCTS PE-0417 1/4" -OD X .170"-ID Poly Tube (FT)
1/4"-OD X .170"-ID POLYETHYLENE TUBE/TUBING MAXIMUM WORKING PRESSURE AT 75-DEGREES FARENHEIT: 173-PSI WALL THICKNESS: .040" COLOR: NATURAL
Recently Viewed
1/4"-OD X .170"-ID POLYETHYLENE TUBE/TUBING MAXIMUM WORKING PRESSURE AT 75-DEGREES FARENHEIT: 173-PSI WALL THICKNESS: .040" COLOR: NATURAL
Browning® 1296474 T45L Automatic Torque Limiter, 1-3/8 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Browning® 1296987 Tightener Shaft, 1-1/2 in Dia x 6 in L Shaft, 7-11/16 in OAL
Browning® 1296987 Tightener Shaft, 1-1/2 in Dia x 6 in L Shaft, 7-11/16 in OAL
3/8" -OD POLYETHYLENE TUBING IS FLEXIBLE AND CRACK RESISTANT. OPERATING TEMPERATURES IS 150 DEGREES F TO -76 DEGREES F. SOLD BY THE FOOT-JWH426881FT >
1-1/4" -IDX1-1/2" -OD VITON O-RING
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
