NIBCO® Press System® 9043305PC PC606 Straight Elbow, 2 in Nominal, Press End Style, Wrot Copper, Domestic
The NIBCO® Press System® copper 45-degree elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The elbow has press connections. The fitting provides a method of changing the pipeline direction by 45 degrees.
-
BrandNIBCO®
-
UPC039923416988
-
Manufacturer Part Number9043305PC
-
CountryUSA
-
Temperature Rating-20 to 250 deg F
-
MaterialWrot Copper
-
Fitting/Connector Type45 deg Elbow
-
Pressure Rating200 psi CWP
-
TypeStraight
-
Nominal Size2 in
-
SeriesPC606
-
Domestic/ImportDomestic
-
End StylePress
-
Method of ManufactureCast
-
Dimensions5.535 in L x 4.111 in W x 2.571 in H
- Select configurations to 300 psi cwp
- Dezincification resistant
- EPDM O-ring
- Silicone lubrication
- Hot water up to 250 deg F, chilled water down to 33 deg F
- Approved for underground installation (per local installation code)
- Use with hard/soft ASTM B88 K, L and M copper tube
-
UNSPSC40183100
-
Package Description1/PK
-
Standards/ApprovalsAlloy C12200|ASME B16.51|ASTM B75|CSA MSE 13|PS-117|IAPMO PS-117|ICC-ES LC1002|Low Lead Compliant|NSF/ANSI 61/372|UPC Listed
-
IncludesEPDM O-Ring
-
Warranty50 years Limited
-
SDS
-
Warranty Information
-
Instruction/Installation Manual
-
Instruction/Installation Manual
Recently Viewed
NIBCO® Press System® 9043305PC PC606 Straight Elbow, 2 in Nominal, Press End Style, Wrot Copper, Domestic
The NIBCO® Press System® copper 45-degree elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The elbow has press connections. The fitting provides a method of changing the pipeline direction by 45 degrees.
Incandescent lamps are still commonly used in homes and businesses and with our wide selection, we have enough shapes, wattages and finishes to fit almost every application and need. Many of our incandescent lamps are also available in an extended life, 130 VAC version, with even more environmentally friendly alternatives coming soon.
HCI Preferred Supplier 44253LF Imperial Pipe Tee, 1/2 in Nominal, Bronze
HCI Preferred Supplier 44254LF Imperial Pipe Tee, 3/4 in Nominal, MNPT End Style, Bronze
HCI Preferred Supplier 44254LF Imperial Pipe Tee, 3/4 in Nominal, MNPT End Style, Bronze
Drillco 445E140 4450E Imperial Hand Reamer, 5/8 in Dia x 7 in OAL, Square Shank, Spiral Flute
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry.
HCI Preferred Supplier 44473LF Imperial Pipe Cap, 1/2 in Nominal, Bronze
