NIBCO® Press System® 9056405PC PC607 Straight Elbow, 2 in Nominal, Press End Style, Wrot Copper, Domestic
The NIBCO® Press System® copper 90-degree elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The elbow has press connections. The fitting provides a method of changing the pipeline direction by 90 degrees.
-
BrandNIBCO®
-
UPC039923416964
-
Manufacturer Part Number9056405PC
-
CountryUSA
-
Temperature Rating-20 to 250 deg F
-
MaterialWrot Copper
-
Fitting/Connector Type90 deg Elbow
-
Pressure Rating200 psi CWP
-
Method of ManufactureCast
-
TypeStraight
-
Nominal Size2 in
-
SeriesPC607
-
Dimensions5.733 in L x 2.57 in W x 5.733 in H
-
Domestic/ImportDomestic
-
End StylePress
- Select configurations to 300 psi cwp
- Dezincification resistant
- EPDM O-ring
- Silicone lubrication
- Hot water up to 250 deg F, chilled water down to 33 deg F
- Approved for underground installation (per local installation code)
- Use with hard/soft ASTM B88 K, L and M copper tube
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | NPC607LDK |
-
UNSPSC40183100
-
Package Description1/PK
-
Standards/ApprovalsAlloy C12200|ASME B16.51|ASTM B75|CSA MSE 13|PS-117|IAPMO PS-117|ICC-ES LC1002|Low Lead Compliant|NSF/ANSI 61/372|UPC Listed
-
Warranty50 years Limited
-
SDS
-
Warranty Information
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
NIBCO® Press System® 9056405PC PC607 Straight Elbow, 2 in Nominal, Press End Style, Wrot Copper, Domestic
The NIBCO® Press System® copper 90-degree elbow features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. The elbow has press connections. The fitting provides a method of changing the pipeline direction by 90 degrees.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® Classical Gripbelt® 1028174 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3-3/4 in OD, 3.2 in (A)/3.7 in (B) Dia Pitch, 7/8 in W Face
Milwaukee® HAMMERVAC™ 4253-1 Keyed Magnetic Motor, For Use With Electromagnetic Drill Press
Lightweight with ample power, the 1/2 in. electromagnetic drill press motor is ideal for drilling small holes into steel. At just 8 Lbs., this lightweight 6.2 amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 Lbs. of drill point pressure with a 1 in. steel plate. This unit features a 1/2 in. chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results.






