N-224-SS-6 B-LINE
1/4" S/S SPRING NUTS-BLNN224SS6>
Recently Viewed
1/4" S/S SPRING NUTS-BLNN224SS6>
Browning® 1296417 T45L Automatic Torque Limiter, 3/4 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
EATON GBK14P Ground Bar Kit, 5-3/4 in L, Aluminum/Copper Conductor, 14 Terminals, For Use With Type CH/BR Loadcenter and Circuit Breaker
Specially designed for easy installation, Eaton's BR 1-inch load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. They serve as main breaker for service entrances or as main lug when adding circuits to existing service. The main breaker protects the entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
LENS REFRACTOR REPLACEMENT LENS-JWH508772 >
Westinghouse 7027000 All-Thread Lamp Pipe, For Use With Lighting Fixture, 1/8-IP Threaded, Steel
The all thread lamp pipe is a high quality hardware component ideal for building a new lamp or replacing a worn pipe. This 30 in pipe can act as a foundation for the structure of a lamp while concealing its wiring. It is threaded and features a standard 1/8-IP size to fit with common components. The pipe is brass plated for longevity.
Dichtomatik 67013594 O-Ring, 180 mm ID x 190 mm OD, FKM, 80 Shore A Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
