Rust-Oleum 1-GAL 9100 SYS STANDARD ACTIVATOR RUS 9101
Rust-Oleum® Steel-Tech™ 9101402 9100 System Standard Epoxy Mastic Activator, 1 gal Container, Liquid Form, Metallic Gray, 125 to 225 sq-ft/gal Coverage
-
BrandRust-Oleum®
-
UPC020066910105
-
Manufacturer Part Number9101402
-
CountryUSA
-
Temperature Rating50 to 100 deg F
-
Chemical Composition4-Nonylphenol, Branched, Polyoxypropylenediamine, Talc (Hydrous Magnesium Silicate), Xylenes (o-, m-, p- Isomers), Benzyl Alcohol, Isophorone Diamine, Propylene Glycol Monomethyl Ether, Nonyl Phenol Branched, Ethylbenzene, Salicylic Acid, 1-Propene
-
FormLiquid
-
ColorMetallic Gray
-
TypeStandard
-
VOC Content<340 g/L
-
Container Size1 gal
-
Container TypeCan
-
Coverage125 to 225 sq-ft/gal
-
Series9100 System
-
Odor/ScentSlight Amine
- Requires 1/3 less product and 1/3 less dry time than other brands
- Applies direct-to-metal (DTM) no primer or additional coats needed
- Two-year rust proof guarantee - maximum corrosion protection
- Can be used with a range of activators for a variety of environments, easy 1:1 mixing ratio
- 5 years activator components shelf life
- Brush, roll, spray application method
- Aliphatic amine converted epoxy resin type
- Epoxy standard activator
- 50 to 100 deg F for air and surface
- 6 to 8 hrs tack-free dry time, 6 to 12 hrs handle dry time, 16 hrs recoat dry time
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 5A275 |
| MSC | 00243527 |
-
UNSPSC31211500
-
Package Description2/PK
-
Standards/ApprovalsASTM/GHS Certified|USDA FSIS Approved
-
Specification Sheet
-
SDS
Recently Viewed
Rust-Oleum® Steel-Tech™ 9101402 9100 System Standard Epoxy Mastic Activator, 1 gal Container, Liquid Form, Metallic Gray, 125 to 225 sq-ft/gal Coverage
Browning® 1296516 T55L Automatic Torque Limiter, 1-1/4 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Intertape® PG500.13 Utility Grade Masking Tape, 54.8 m L x 48 mm W, 5 mil THK, Synthetic Rubber/Resin Adhesive, Smooth Crepe Paper Backing
Intertape® and American® brand masking tape and painter's tape products are designed for superior performance in a variety of applications such as paint masking, holding, light duty, splicing, bundling, packaging and many more. The premium grade products have set the standard for the most demanding industrial, painting and transportation industry applications.
RUS-KIL VISTA GREEN SPRAY PAINT-BLP1041S >
Browning® 1296391 Automatic Torque Limiter, 1 in Straight Bore, 3-1/2 in OD, 1800 in-lb (1 Spring)/3000 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
Browning® 1296342 Automatic Torque Limiter, 3/4 in Straight Bore, 2-1/2 in OD, 800 in-lb (1 Spring)/1100 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
