10-41-S BLP MOBILE PAINTS
RUS-KIL VISTA GREEN SPRAY PAINT-BLP1041S >
Recently Viewed
RUS-KIL VISTA GREEN SPRAY PAINT-BLP1041S >
Intertape® PG500.13 Utility Grade Masking Tape, 54.8 m L x 48 mm W, 5 mil THK, Synthetic Rubber/Resin Adhesive, Smooth Crepe Paper Backing
Intertape® and American® brand masking tape and painter's tape products are designed for superior performance in a variety of applications such as paint masking, holding, light duty, splicing, bundling, packaging and many more. The premium grade products have set the standard for the most demanding industrial, painting and transportation industry applications.
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
3/4" CROWNED CAM FOLLOWERS-MCGCCF3/4SB>
MAK-A-KEY 300707-305 Metric Undersized Keystock, 305 mm L x 7 mm W x 7 mm H, Carbon Steel, Plain, Metric 296-007
A stock of material that is one foot or greater in length, and from which shaft keys are made. We manufacture keystock to suit every application need you have, in every size, grade and tolerance imaginable. Available in stocked standard sizes or custom made to your specifications.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
