Krylon BLACK U/D MARKING SPRAY PAINT KRY S-03550
-
BrandKrylon®
-
UPC075577935505
-
Manufacturer Part NumberA03550
-
CountryUSA
-
Chemical CompositionPropane, Butane, Light Aliphatic Hydrocarbon Solvent, Toluene, Ethylbenzene, Xylene, Acetone, Talc, Carbon Black
-
FormLiquid
-
ColorAsphalt Black
-
TypeSolvent Base
-
VOC Content0.94
-
Viscosity<20.5 cSt
-
Container Size20 oz
-
Container TypeAerosol Can
-
pH Range7
- Inverted marking paint has a high solids formulation that gives them the boldest, brightest and most visible markings in the industry
- The fast drying products penetrate and adhere to hot surfaces and deliver a line you can count on for all your locating, marking and surveying needs
- Convenient spray Thruâ„¢ cap
- Can be recoated anytime
- Alkyd enamel resin
- 0.87 specific gravity
- Spray application
- 17 oz net weight
- Non-clogging spray tip
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 38EL03 |
-
UNSPSC31211513
-
Package Description12/CS
-
Standards/ApprovalsOSHA 29 CFR 1910.1200
-
SDS
Recently Viewed
Browning® 1296615 T65L Automatic Torque Limiter, 1-15/16 in Finished Bore, 6-1/2 in OD, 4800 in-lb (1-Spring)/8800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
1-1/16" -ID 1-3/16" -OD VITON O-RING
3.438" X 4.756" X .438"RADIAL SHAFT SEAL WITH DOUBLE METAL CASE, SKF WAVE LIP, FOR OIL OR GREASE
1" -ID REINFORCED VINYL TUBE (FT)-M-MHOSE2260 >
TCM08111VM>
